search query: @instructor Keskinen, Kari I. / total: 27
reference: 2 / 27
Author: | Raunio, Tatu |
Title: | Bioperäisiä raaka-aineita käyttävien prosessien perustietojen määritys ja laskenta |
Basic data for manufacturing processes that use bio based raw materials | |
Publication type: | Master's thesis |
Publication year: | 2011 |
Pages: | ix + 65 Language: fin |
Department/School: | Kemian laitos |
Main subject: | Kemian laitetekniikka (Kem-42) |
Supervisor: | Alopaeus, Ville |
Instructor: | Keskinen, Kari I. |
OEVS: | Electronic archive copy is available via Aalto Thesis Database.
Instructions Reading digital theses in the closed network of the Aalto University Harald Herlin Learning CentreIn the closed network of Learning Centre you can read digital and digitized theses not available in the open network. The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/ You can read theses on the Learning Centre customer computers, which are available on all floors.
Logging on to the customer computers
Opening a thesis
Reading the thesis
Printing the thesis
|
Location: | P1 Ark Aalto 1911 | Archive |
Keywords: | bio based fuels physical properties bioperäiset polttoaineet aineominaisuudet |
Abstract (eng): | Basic data for manufacturing processes that use bio based raw materials were gathered as much as possible in this thesis. In the literature part different bio based raw materials that are used in fuel production were examined. Some pre-treatment methods for the raw materials were studied and some manufacturing methods for bio based fuels were investigated. Lastly physical properties for processing bio based raw materials were introduced. In the applied part physical properties for vegetable oil and animal fat components were searched from open literature. Estimation methods for the physical properties were also researched. There is not much data available for the required physical properties and some that were found are not applicable because of the different measurement conditions. Several computational methods for the physical properties were found but often they were applicable only in some specific cases. Missing data has to be measured in-house of bought as service from research institutions/companies making good quality measurements or bought from commercial data bases. Since a lot of data needed, it is obvious that physical property estimation methods have to be used. |
Abstract (fin): | Diplomityön tavoitteena oli kartoittaa mahdollisimman laajalti ainearvotietoja suunniteltaessa bioperäisiä raaka-aineita käyttäviä valmistusprosesseja. Kirjallisuusosassa tarkasteltiin erilaisia polttoaineiden valmistukseen soveltuvia bioperäisiä raaka-aineita. Työssä tarkasteltiin raaka-aineiden esikäsittelymenetelmiä sekä eräitä bioperäisten polttoaineiden valmistusreittejä. Lopuksi esiteltiin valmistusprosessin suunnittelussa tarvittavia aineominaisuuksia. Soveltavassa osassa etsittiin kasviöljyjen ja eläinrasvojen sisältämien komponenttien perusaineominaisuustietoja. Työssä tarkasteltiin myös aineominaisuustietojen estimointimenetelmiä. Julkisesti saatavilla olevasta kirjallisuudesta haluttuja perusaineominaisuustietoja löytyi hyvin rajallisesti. Joidenkin löydettyjen tietojen soveltaminen valmistusprosesseihin on haasteellista, johtuen erilaisista mittausolosuhteista. Laskennallisia menetelmiä perusaineominaisuustietojen määrittämiseen löytyy useita, mutta ne monesti soveltuvat vain tietyille tapauksille. Puuttuvat aineominaisuudet on mitattava itse, mittautettava tutkimuslaitoksilla tai mittauksiin erikoistuneilla yrityksillä tai hankittava maksullisista tietokannoista. Koska mitattavaa on paljon, jouduttaneen kuitenkin prosessisuunnittelussa suurelta osin turvautumaan erilaisiin aineominaisuuksien estimointimenetelmiin. |
ED: | 2011-11-08 |
INSSI record number: 42923
+ add basket
INSSI