search query: @keyword viskoelastinen / total: 3
reference: 3 / 3
« previous | next »
Author:Lehtinen, Ville
Title:Mechanical characterization of underfill for flip chip - assembly's reliability analysis
Alustäytteen mekaaninen karakterisointi "flip chip" - kokoonpanon luotettavuusanalyysiä varten
Publication type:Master's thesis
Publication year:1999
Pages:90      Language:   eng
Department/School:Materiaali- ja kalliotekniikan osasto
Main subject:Elektroniikan valmistustekniikka   (S-113)
Supervisor:Kivilahti, Jorma
Instructor:Reinikainen, Tommi
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark V80     | Archive
Keywords:flip chip
FEM
underfill
reliability
viscoelastic
epoxy
luotettavuus
alustäyte
viskoelastinen
epoksi
Abstract (fin):Tässä työssä on mallinnettu "flip chip"-kokoonpanon (FC) luotettavuutta elementtimenetelmällä (FEM).
Painopisteenä työssä on ollut alustäytteen mekaaninen karakterisointi ja sen viskoelastisen käyttäytymisen sisällyttäminen mallinnukseen.

Työn johdanto-osassa on esitelty erilaisia FC teknologioita ja menetelmiä niiden luotettavuuden ennustamiseksi.
Työssä on keskitytty FC:hin orgaanisella alustalla (FCOB teknologia) ja niiden luotettavuuden ennustamiseen elementtimenetelmällä.
Koska epoksipohjainen alustäyte on tärkeässä osassa FCOB:n mekaanisessa käyttäytymisessä, niin se on esitelty tarkemmin.

Kokeellisessa osassa on karakterisoitu epoksipohjaista alustäytettä vetovirumiskokeilla, DMA:lla ja termomekaanisella analyysillä (TMA).
Alustäytteen aika- ja lämpötilariippuvat mekaaniset ominaisuudet on määritelty vetovirumiskokeilla.
Myös DMA:ta on käytetty aika- ja lämpötilariippuvien mekaanisten ominaisuuksien määritykseen, mutta lähinnä vertailuna.
Alustäytteen lämpölaajenemiskerroin on määritelty TMA:lla.
Kokeiden tuloksista on määritelty viskoelastiset materiaaliparametrit kaupallista ANSYS FEM-ohjelmistoa varten.
Visloelastisen alustäytemallin vaikutusta FC:n termomekaaniseen käyttäytymiseen on tutkittu simuloimalla lämpösyklausta ANSYS-ohjelmistolla.
Simuloinnit on tehty käyttäen sekä elastista että viskoelastista materiaalimallia alustäytteelle.

Simulointien tulokset osoittivat suuria eroja elastisen ja viskoelastisen alustäytemallin välillä.
Simuloinnissa, joka tehtiin käyttäen viskoelastista mallia alustäytteelle, plastinen työ rasitetuimmissa juoteliitoksissa oli huomattavasti pienempi.
Tämän voidaan olettaa johtuvan jännitysten relaksoitumisesta alustäytteessä.
Alustäytteen relaksoituminen vaikuttaa juoteliitosten termomekaaniseen käyttäytymiseen, koska alustäytteen mekaaninen merkitys on suuri FCOB:ssä.
ED:1999-12-17
INSSI record number: 14986
+ add basket
« previous | next »
INSSI