search query: @keyword 42CrMo4 / total: 3
reference: 3 / 3
« previous | next »
Author: | Kilpi, Jaakko |
Title: | Typetys vaihtoehtona kovakromaukselle |
Nitriding heat treatments, an alternative to hard chromium plating | |
Publication type: | Master's thesis |
Publication year: | 2004 |
Pages: | 104 Language: fin |
Department/School: | Materiaali- ja kalliotekniikan osasto |
Main subject: | Materiaalien muokkaus ja lämpökäsittely (Mak-65) |
Supervisor: | Kivivuori, Seppo |
Instructor: | Helander, Kari |
OEVS: | Electronic archive copy is available via Aalto Thesis Database.
Instructions Reading digital theses in the closed network of the Aalto University Harald Herlin Learning CentreIn the closed network of Learning Centre you can read digital and digitized theses not available in the open network. The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/ You can read theses on the Learning Centre customer computers, which are available on all floors.
Logging on to the customer computers
Opening a thesis
Reading the thesis
Printing the thesis
|
Location: | P1 Ark V80 | Archive |
Keywords: | nitriding hard chromium plating Imanite M 42CrMo4 typetys kovakromaus Imanite M 42CrMo4 |
Abstract (eng): | The first part of thesis concentrates on the theory behind nitriding and hard chromium plating and their influence on friction, fatigue and corrosion resistance. The nitriding processes used in the experimental part are introduced as well as typical nitriding faults and their prevention through the process control. In the experimental part friction, fatigue and corrosion resistance of nitrided Imanite M and 42CrMo4 steel specimens were compared with hard chromium plated specimens. Corrosion resistance was examined using salt spray tests and a pin-on-disk apparatus was used for friction and fatigue testing. Surface hardness, case and nitriding depths were measured using a Vickers-hardness apparatus. Surface roughness, surface profiles and bearing curves were measured before and after the pin-on-disk tests. Salt spray tests show the influence of base material on the nitriding result and the effect of compound layer porosity on corrosion resistance. The nitriding processes which produce non-porous compound layers had a slightly better corrosion resistance and smaller friction coefficient compared to hard chromium plated specimens. In general differences in friction coefficients between nitrided and hard chromium plated specimens were small. |
Abstract (fin): | Työn kirjallisessa osassa käsiteltiin typetyksen ja kovakromauksen teoriaa sekä menetelmien vaikutusta korroosionkestoon, kitkaan ja kulumiseen. Lisäksi käytiin läpi kokeellisessa osassa käytetyt typetysmenetelmät sekä tyypilliset typetyksessä tapahuvat virheet ja niiden ehkäisy prosessin valvonnalla. Työn kokeellisessa osassa vertailtiin eri typetysmenetelmillä typetettyjen Imanite M ja 42CrMo4 koekappaleiden korroosionkestoa sekä kitkaa ja kulumista kovakromattuihin koekappaleisiin. Korroosionkestoa tutkittiin suolasumukokeilla, kitkan ja kulumisen tutkimiseen käytettiin tappikulutuskoetta. Koekappaleiden pintakovuudet, kerrospaksuudet sekä typetyssyvyydet määritettiin Vickers-kovuusmittauslaitteiston avulla. Lisäksi tappikulutuskappaleille mitattiin pinnan karheudet, kantokäyrät sekä pinnan profiilit ennen ja jälkeen koetta. Suolasumukokeiden tuloksista ilmeni perusaineen vaikutus typetystulokseen sekä muodostuvan yhdistekerroksen tiiviyden vaikutus korroosionkestoon. Typetysmenetelmillä, joilla yhdistekerrokseen tiiviys oli tarpeeksi suuri, saavutettiin hieman kovakromattuja koekappaleita parempi korroosionkesto sekä pienemmät kitkakertoimet. Muuten typetettyjen ja kovakromattujen kappaleiden välillä ei havaittu suurta eroa kitkakertoimissa. |
ED: | 2004-11-05 |
INSSI record number: 26459
+ add basket
« previous | next »
INSSI