search query: @keyword reproducibility / total: 3
reference: 1 / 3
« previous | next »
Author: | Ainali, Jukka |
Title: | Analysis tool for monitoring of production of electronics using gage repeatibility and reproducibility indices |
Mittalaitteen toistettavuuden ja uusittavuuden analysointityökalu elektroniikkatuotannon seurantaan | |
Publication type: | Master's thesis |
Publication year: | 2010 |
Pages: | 54 + [12] Language: eng |
Department/School: | Elektroniikan, tietoliikenteen ja automaation tiedekunta |
Main subject: | Mittaustekniikka (S-108) |
Supervisor: | Kärhä, Petri |
Instructor: | Pelkonen, Tuomo |
OEVS: | Electronic archive copy is available via Aalto Thesis Database.
Instructions Reading digital theses in the closed network of the Aalto University Harald Herlin Learning CentreIn the closed network of Learning Centre you can read digital and digitized theses not available in the open network. The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/ You can read theses on the Learning Centre customer computers, which are available on all floors.
Logging on to the customer computers
Opening a thesis
Reading the thesis
Printing the thesis
|
Location: | P1 Ark Aalto 656 | Archive |
Keywords: | Gage R&R process capability measurement system analysis repeatability reproducibility ANOVA Gage R&R prosessin kyvykkyys mittausjärjestelmän analysointi toistettavuus uusittavuus ANOVA |
Abstract (eng): | Gage R&R (Repeatability and Reproducibility) has become a widely used de facto standard in measuring the quality of the test systems. Gage R&R is adopted tightly into the Six Sigma Methodology and is one of the key stones among the methodologies measuring variables. Gage R&R is widely known, but less used in the manufacturing process monitoring. This is mostly due to the time taking process of gathering the test data and also due to the lack of knowledge, what the Gage R&R variables actually stand for. This thesis was made to satisfy the need to make the Gage R&R analysis with little effort and for the whole test system and for every test step at the same time in short time. Normally when analysis is executed, the test specific data is collected from the different test result sheets to one sheet, and the analysis is carried out with statistical analysis software to get the results for the specific test. This is repeated for all measurements. If there are tens or even hundreds of measurements, it is clear that analysing the whole test system takes days. Now with the analysis tool, the same work can be done in a few minutes. Additionally to the normal ANOVA Gage R&R analysis, process capability indices Cp and Cpk are determined. This is done to make better judgments on the quality of the test systems and the production process. In the validation of the analysis tool two different test result data sets were used. From the data, three different ANOVA Gge R&R analysis were executed. The results of the analysis tool were compared with the results calculated by the Minitab statistical software. The results were coherent. The analysis tool as such is applicable when the analysis is done for the test system in its deployment to the production. In productions daily use the tool is applicable, only if the size of the database is limited. When size of the database gets bigger, the analysis time increases drasticaliy. |
Abstract (fin): | Gage R&R (toistettavuus ja uusittavuus) on testauslaitteiden ja mittalaitteiden toistettavuuden analysointiin tehty analysointitekniikka. Tekniikan avulla voidaan määrittää tuotannon mittauksissa olevien hajonnan komponenttien suhdetta kokonaishajontaan. Gage R&R -analyysi määrittää muun muassa mittalaitteelle toistettavuutta kuvaavan %Gage R&R -tunnusluvun, jota on laajasti käytetty Six Sigma -laadun kehittämisopin yhteydessä. Tämä diplomityö on syntynyt Espotel Oy:n asiakkaiden tarpeista toteuttaa helposti ja nopeasti Gage R&R -analyysi testilaitteelle. Ennen diplomityön tuotteena syntynyttä analysointityökalua markkinoilla ei ole ollut saatavilla automaattista työkalua analyysin toteuttamiseksi. Nyt normaalisti päiviä vievä analysointi voidaan toteuttaa murto-osassa ajasta jopa alle tunnissa kaikille testattavan tuotteen mittauksille kerralla. Työkalu määrittää normaalin ANOVA Gage R&R -analyysin lisäksi myös tuotannon prosessin kyvykkyyttä kuvaavat tunnusluvut Cp ja Cpk kokonaisvaltaisen testauslaitteen ja tuotannon arvioinnin tueksi. Analyysityökalun toiminnan todentamisessa käytettiin kahden eri testisysteemin testitulosdataa, joista muodostutettiin kolme ANOVA Gage R&R -analyysia. Työkalun määrittämiä analyysin tuloksia vertailtiin Minitab-ohjelman määrittämiin tuloksiin ja tulosten todettiin vastaavan toisiaan. Analyysityökalu soveltuu jo sellaisenaan testilaitteen analysointiin käyttöönoton yhteydessä. Tuotannon käyttöön työkalu soveltuu sillä reunaehdolla, että testituloksien tallennukseen käytetyn tietokannan koko on rajattu. Tietokannan kasvaessa työkalun käytettävyys kärsii, kun analyysin muodostamiseen kuluva aika kasvaa merkittävästi. |
ED: | 2010-09-08 |
INSSI record number: 40736
+ add basket
« previous | next »
INSSI