search query: @keyword morfologinen analyysi / total: 3
reference: 2 / 3
« previous | next »
Author:Seppälä, Mikko Veli Juhani
Title:Virtual Prototyping in Design Concept Selection: A Case Study on a Mobile Robot
Virtuaalityyppien käyttö suunnittelukonseptin valinnassa; Tapaustutkimus liikkuvasta robotista
Publication type:Master's thesis
Publication year:2011
Pages:[10] + 65 s. + liitt. 10      Language:   eng
Department/School:Automaatio- ja systeemitekniikan laitos
Main subject:Automaatiotekniikka   (AS-84)
Supervisor:Visala, Arto
Instructor:Coatanéa, Eric ; Buda, Andrea
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark Aalto  5644   | Archive
Keywords:virtual prototyping
robotics
concept selection
morphological analysis
Taguchi method
virtuaalinen prototyyppi
robotiikka
konseptinvalinta
morfologinen analyysi
Taguchi-menetelmä
Abstract (eng): Concept selection is an important part of the design process.
Traditionally concept selection is done based on subjective expert reviews using decision making tools like Pugh charts.
However, there has been discussion in the engineering design literature about utilizing simulations very early in the design.

In the field of robotics, new 3D simulation tools allow rapid development of fully functional robot models in realistic environments.
This thesis presents a method for using these tools to create virtual prototypes of design concepts and to evaluate their performance.
The method aims at finding an optimal design configuration from a set of alternatives, which can be presented as a morphological box also called a Zwicky matrix.
Taguchi method is used for design of experiments and numeric performance evaluation.

To test the method, a case study is presented, demonstrating virtual prototype driven concept selection for a Eurobot 2010 competition robot.
The case study shows, that virtual prototyping is beneficial in concept selection to rule out faulty design concepts and to identify additional requirements that should be taken to account in the design.
However, the numerical performance analysis using the Taguchi-method was found unreliable due to the many uncontrollable or unknown design parameters present in the early design stage.
Abstract (fin): Suunnitteluprosessin tärkeimpiä vaiheita on konseptinvalinta.
Perinteisesti konsepti valitaan subjektiivisten asiantuntija-arvioiden perusteella. käyttäen apuna päätöksentekotyökaluja. kuten Pugh-taulukoita.
Kirjallisuudessa on kuitenkin esitetty ajatuksia simulaatioiden käytöstä aivan suunnitteluprosessin alkuvaiheista lähtien.
Näin konseptinvalintavaiheen tärkeille päätöksille saadaan objektiivisia perusteita.

Robotiikan alalla uudet, 3-ulotteiset simulointityökalut mahdollistavat robottien toimintojen nopean virtuaalisen mallintamisen realistisessa ympäristössä.
Tässä diplomityössä esitetään menetelmä, jolla näitä uusia työkaluja käyttäen luodaan suunnittelukonsepteista virtuaalisia prototyyppejä, joita voidaan käyttää konseptien suorituskyvyn arviointiin.
Menetelmän tavoitteena on valita optimaalinen konsepti vaihtoehdoista jotka on esitetty morfologisessa laatikossa eli Zwicky-matriisissa.
Taguchi-menetelmää käytetään koesuunnitteluun ja konseptien suorituskyvyn numeeriseen arviointiin.

Esitettyä menetelmää testataan tapaustutkimuksessa. jossa sitä sovelletaan Eurobot:2010 kilpailurobotin konseptinvalintaan.
Tapaustutkimus osoittaa, että virtuaalinen prototypointi on käyttökelpoinen työkalu, jolla selvästi vialliset suunnittelukonseptit ja huomaamatta jääneet suunnitteluvaatimukset voidaan tunnistaa.
Taguchi-menetelmään perustuva numeerinen suorituskyvyn analysointi osoittautui kuitenkin vain suuntaa antavaksi, sillä konseptinvalintavaiheessa suunnitteluparametreja ei voida hallita riittävästi tai ne ovat tuntemattomia.
ED:2011-08-16
INSSI record number: 42650
+ add basket
« previous | next »
INSSI