search query: @keyword Aalto-2 / total: 3
reference: 2 / 3
Author: | Hemmo, Jussi |
Title: | Electrical Power Systems for Finnish Nanosatellites |
Suomalaisten nanosatelliittien tehonsyöttöjärjestelmät | |
Publication type: | Master's thesis |
Publication year: | 2013 |
Pages: | viii + 70 s. + liitt. 17 Language: eng |
Department/School: | Sähkötekniikan korkeakoulu |
Main subject: | Elektroniikka ja sovellukset (S3007) |
Supervisor: | Sepponen, Raimo |
Instructor: | Kyyrä, Jorma |
Electronic version URL: | http://urn.fi/URN:NBN:fi:aalto-201401141129 |
OEVS: | Electronic archive copy is available via Aalto Thesis Database.
Instructions Reading digital theses in the closed network of the Aalto University Harald Herlin Learning CentreIn the closed network of Learning Centre you can read digital and digitized theses not available in the open network. The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/ You can read theses on the Learning Centre customer computers, which are available on all floors.
Logging on to the customer computers
Opening a thesis
Reading the thesis
Printing the thesis
|
Location: | P1 Ark Aalto 1121 | Archive |
Keywords: | electrical Power System EPS step-down step-up boost DC-DC converter solar cell nanosatelliitti tehonsyöttöjärjestelmä Aalto-1 Aalto-2 CubeSat aurinkokenno DC-DC konvertteri |
Abstract (eng): | Nanosatellites are lightweight, small and use low power compared to conventional satellites. University satellites are often based on CubeSat standard. 1U CubeSat is a cube shaped nanosatellite with dimensions of 10 cm x 10 cm x 10 cm and maximum mass of 1.33 kilograms. CubeSats are traditionally built from COTS-components (Commercial Off-the-Shelf) with low resources. Typically nanosatellites have limited mission time and short development and testing time. Electrical Power System (EPS) is responsible in producing and storing energy needed for subsystems and payloads in a spacecraft. It consists of primary and secondary power sources and EPS-board controlling the distribution of the energy to subsystems and payloads. EPS provides telemetry data about currents, voltages, battery status etc. to OBC (On-Board Computer). This thesis discusses the requirements for Aalto-1 and Aalto-2 electrical power systems. Also preliminary design of an EPS for Aalto-2 nanosatellite is presented. |
Abstract (fin): | Nanosatelliitit ovat pieniä ja kevyitä satelliitteja, jotka käyttävät vähän tehoa verrattuna perinteisiin satelliitteihin. Yliopistosatelliittien suunnittelussa käytetään usein ns. CubeSat standardia. Siinä määritellään, että 1U CubeSat on kuution muotoinen nanosatelliitti, jonka mitat ovat 10 cm x 10 cm x 10 cm ja sallittu massa maksimissaan 1.33 kilogrammaa. Nanosatelliitit on yleensä rakennettu ns. COTS-komponenteista (Commercial off-the-shelf), vähäisillä resursseilla verrattuna perinteisiin satelliittiprojekteihin. Tyypillisesti CubeSat-tyyppisten nanosatelliittien kehittämiseen ja testaamiseen käytetty aika on lyhyt. Satelliitin tehonsyöttöjärjestelmä (EPS, Electrical Power System) tuottaa ja varastoi alijärjestelmien ja hyötykuormien tarvitseman energian. Se koostuu yleensä aurinkopaneeleista, akuista ja tehonjakelujärjestelmästä, joka huolehtii tehon jakamisesta järjestelmille. Tehonsyöttöjärjestelmä tuottaa myös telemetria-dataa virroista, jännitteistä, akun kunnosta ym. satelliitin tietokoneelle. Tämän työn tarkoituksena on määrittää vaatimukset Aalto-1 ja Aalto-2 nanosatelliittien tehonsyöttöjärjestelmille ja kehittää Aalto-2 nanosatelliitin tehonsyöttöjärjestelmän prototyyppi. |
ED: | 2014-01-19 |
INSSI record number: 48461
+ add basket
INSSI