search query: @instructor Pihlasalo, Jouni / total: 3
reference: 1 / 3
« previous | next »
Author: | Perttala, Otto |
Title: | Kuonan muodostaman autogeenivuorauksen reaktiot uunin seinällä |
Reactions of freeze-lining on furnace's surface | |
Publication type: | Master's thesis |
Publication year: | 2014 |
Pages: | ix + 100 s. + liitt. 138 Language: fin |
Department/School: | Materiaalitekniikan laitos |
Main subject: | Materiaalien prosessointi (MT3002) |
Supervisor: | Taskinen, Pekka |
Instructor: | Pihlasalo, Jouni ; Jäfs, Mikael ; Hellstén, Niko |
Electronic version URL: | http://urn.fi/URN:NBN:fi:aalto-201501301784 |
OEVS: | Electronic archive copy is available via Aalto Thesis Database.
Instructions Reading digital theses in the closed network of the Aalto University Harald Herlin Learning CentreIn the closed network of Learning Centre you can read digital and digitized theses not available in the open network. The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/ You can read theses on the Learning Centre customer computers, which are available on all floors.
Logging on to the customer computers
Opening a thesis
Reading the thesis
Printing the thesis
|
Location: | P1 Ark Aalto 2540 | Archive |
Keywords: | freeze-lining delafossite magnetite copper oxide annealing delafossiitti magnetiitti kuparioksidi hehkutus |
Abstract (eng): | The objective of the thesis was to study experimentally how a freeze-lining structure, which was formed on cold metal surface, changes or develops with over one hour of annealing at a temperature lower than normal process conditions on hot surface of copper flash smelting furnace. Duration of annealing and sample compositions were taken into consideration when the assessment of samples' microstructure took place. There were six samples to be annealed with different compositions. The copper concentrations of the samples varied between 21.5-38.0 wt%. From each of the samples, two pieces were cut for annealing. First of the pieces was annealed for 24 hours and the second for 192 hours. An annealing temperature of 900 °C was chosen. The actual annealing took place in a horizontal tube furnace with silicon carbide resistor in argon atmosphere (99.99 % Ar). The hot samples were let to cool down slowly in normal atmosphere after the annealing. Images were then taken from the annealed samples with SEM, and EDS analysis was performed for specific parts of the samples in order to find out the element composition. Lastly, the 24 hour, the 192 hour, and unannealed samples were compared together to see if there was any changes or development in the microstructure due to the annealing. The most significant finding of the thesis was growth of delafossite in the samples due to annealing. Also, in the samples where delafossite needles were present, shrinkage of the needles were detected, as a consequence of the annealing. Because of the increase of the delafossite, the fraction of magnetite in the samples decreased. The annealing affected also the growth of the copper oxide. The increased quantity of the copper oxide manifested itself especially in more sizeable copper oxide grains in the glass matrix in the annealed samples. A noteworthy observation was made in copper oxide penetration of refractory lining with the high copper concentration samples. Due to the extended annealing, the copper oxide penetrated the refractory lining more intensively and with larger quantities. |
Abstract (fin): | Työn tarkoituksena oli tutkia kokeellisesti, miten kuparin liekkisulatuksessa kylmän metallipinnan päälle muodostuneen kuonan autogeenikerroksen, eli freeze liningin rakenne muuttuu ja kehittyy yli 1 h altistuksella, uunin kuumalla pinnalla ja arvioida näin prosessilämpötilaa matalamman hehkutuslämpötilan ja eri hehkutusaikojen vaikutuksia freeze liningin mikrorakenteisiin eri pitoisissa näytteissä. Hehkutettavia, eri kuparipitoisuuden omaavia näytteitä oli kaikkiaan kuutta erilaista. Näytteiden kuparipitoisuudet vaihtelivat välillä 21,5-38,0 p-%. Kustakin näytteestä leikattiin kaksi näytepalaa, joista toista hehkutettiin yhden vuorokauden ajan ja toista kahdeksan vuorokautta. Hehkutuksiin valittiin 900 °C:n lämpötila. Hehkutukset suoritettin vaakatasossa olevalla, piikarbidivastuksella (SiC) kuumennettavalla putkiuunilla, argon-atmosfäärissä (99,99 % Ar). Hehkutuksen jälkeen näytekappaleet sammutettiin hiljalleen huoneenlämmössä. Tämän jälkeen kukin näyte kuvattiin SEM:lla ja valituista kohdista otettiin alkuaineanalyysit EDS-menetelmällä. Yhden vuorokauden hehkutettua näytettä, kahdeksan vuorokautta hehkutettua näytettä ja hehkuttamatonta näytettä verrattiin lopuksi keskenään, jotta saataisiin selville mahdolliset hehkutuksen aiheuttamat muutokset mikrorakenteissa. Tärkeimpänä havaintona työssä voidaan pitää delafossiitin määrällinen kasvu hehkutuksen johdosta. Näytteissä, joissa esiintyi delafossiittineulasia, huomattiin myös neulasten kutistumista hehkutusajan kasvaessa. Delafossiitin määrällisen kasvun johdosta magnetiitin määrä pieneni näytteissä. Hehkutus vaikutti myös kuparioksidin määrään kasvattavasti. Tämä näkyi etenkin lasimatriisin seassa olevien kuparioksidirakeiden kasvuna. Merkittävä havainto tutkimustuloksista tehtiin kuparioksidin tunkeutumisesta vuoraustiileen kor-keakuparisissa näytteissä. Hehkutuksen johdosta kuparioksidi tunkeutui vuoraustiileen yhä syvemmälle ja yhä suurempina määrinä. |
ED: | 2015-02-08 |
INSSI record number: 50535
+ add basket
« previous | next »
INSSI