search query: @keyword IGBT / total: 32
reference: 9 / 32
Author: | Räisänen, Paula |
Title: | Insulated Gate Bipolar Transistor Closed-loop Active Current and Voltage Slope Control |
Tehotransistorin virran- ja jännitteen nousunopeuden säätäminen | |
Publication type: | Master's thesis |
Publication year: | 2013 |
Pages: | vii + 42 s. + liitt. 4 Language: eng |
Department/School: | Sähkötekniikan laitos |
Main subject: | Sähkökäytöt (S3016) |
Supervisor: | Kyyrä, Jorma |
Instructor: | Hellman, Jouko |
Electronic version URL: | http://urn.fi/URN:NBN:fi:aalto-201305216409 |
OEVS: | Electronic archive copy is available via Aalto Thesis Database.
Instructions Reading digital theses in the closed network of the Aalto University Harald Herlin Learning CentreIn the closed network of Learning Centre you can read digital and digitized theses not available in the open network. The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/ You can read theses on the Learning Centre customer computers, which are available on all floors.
Logging on to the customer computers
Opening a thesis
Reading the thesis
Printing the thesis
|
Location: | P1 Ark Aalto 1367 | Archive |
Keywords: | power electronics IGBT di/dt du/dt closed-loop control tehoelektroniikka suljetun silmukan säätö |
Abstract (eng): | In power electronics Insulated Gate Bipolar Transistors (IGBTs) are widely used especially for switching purposes in power supply and motor-drive applications. However, an optimized behavior of the transistors gate voltage through a gate driver is common issue for product development and design. In this thesis the possibility of a closed-loop active control for the gate driver was examined. The closed-loop active control incorporates a closed-loop feedback signal to the switching event of an IGBT and through a PI-controller the feedback signal is used to attain a desired switching condition i.e. by controlling the current and voltage slopes a wanted switching condition is achieved. The advantages of this control method are stray parameter compensation and dynamicity. A hardware implementation of the suggested topology was designed and tested in this thesis and the test results are presented with conclusions. The results indicate the rightfulness of the closed-loop active control topology and the potential for it to be a considerable alternative to common control methods through further testing. |
Abstract (fin): | IGBT-transistoreita (Insulated Gate Bipolar Transistor) käytetään tehoelektroniikassa kytkinkomponentteina erityisesti teholähteissä ja moottorikäytöissä. Komponentin yleisyydestä huolimatta transistorin hilajännitteen käyttäytyminen on usein esillä oleva ongelma tuotekehityksessä ja tuotesuunnittelussa. Tässä työssä esitellään säätötopologia hilaohjaimelle, joka toimii suljetun silmukan säädöllä. IGBT-transistorilta takaisinkytketty signaali säätää PI-ohjaimen avulla hilalle menevää signaalia ja ohjaa transistorin käyttäytymistä sytytysja sammutusvaiheessa säätämällä virran- ja jännitteen nousunopeutta. Tämän säätötavan etuina ovat sen dynaamisuus ja kyky kompensoida transistorin epäideaalisuuksia. Tässä työssä toteutettiin ehdotettu topologia piirikorttitasolla ja kortti testattiin. Testitulokset ja johtopäätökset on esitetty työn lopussa. Alustavien testien tuloksista voi päätellä ehdotetun suljetun silmukan säädön periaatteen toimivan. Piirin ideaalinen toiminta vaatii kattavampia testejä tulevaisuudessa mutta toimiessaan se tarjoaa varteenotettavan vaihtoehdon yleisiin hilaohjainongelmiin. |
ED: | 2013-05-21 |
INSSI record number: 46742
+ add basket
INSSI