search query: @keyword IGBT / total: 32
reference: 1 / 32
« previous | next »
Author: | Toropainen, Samuli |
Title: | IGBT:n liitoslämpötilan määrittäminen taajuusmuuttajassa |
Determining IGBT's junction temperature in frequency converter | |
Publication type: | Master's thesis |
Publication year: | 2016 |
Pages: | (10) + 69 Language: fin |
Department/School: | Sähkötekniikan korkeakoulu |
Main subject: | Sähkökäytöt (S3016) |
Supervisor: | Kyyrä, Jorma |
Instructor: | Turunen, Ari |
Electronic version URL: | http://urn.fi/URN:NBN:fi:aalto-201604201821 |
Location: | P1 Ark Aalto 3701 | Archive |
Keywords: | frequency converter over temperature protection junction temperature thermal model IGBT taajuusmuuttaja ylilämpösuojaus liitoslämpötila lämpömalli |
Abstract (eng): | In this thesis frequency converter's over temperature protection and estimation of IGBT junction temperature was studied. This thesis also contains literature review for a few different junction temperature estimation and measurement method that can be used for example in a frequency converter. Purpose of this thesis was to determine precision and adequacy of a frequency converter over temperature protection and to develop a junction temperature estimation method that would not need much computing power. To determine functionality of the over temperature protection and estimation method, IGBT's junction temperature was measured with optical measuring equipment. The optical temperature sensor was glued directly to the IGBT's surface metallization in order to obtain the most accurate junction temperature information. It was concluded from the obtained measurement results that the over temperature protection allows IGBT's average junction temperature to rise about 130 °C before it will intervene frequency converter's operation. This will leave about 45 °C margin to the junction temperature's peak value before exceeding manufacturer's maximum junction temperature for the IGBT. By comparing the measurement results and results obtained by the proposed estimation method, it was concluded that in switching frequency of 4 kHz it has accuracy of -1,4...2,3 °C. Throughout the whole switching frequency region it has accuracy of -0,4...5,1 °C with asynchronous motor and -1,1...5,8 °C with permanent magnet synchronous motor. |
Abstract (fin): | Tässä diplomityössä tutkittiin taajuusmuuttajan ylilämpösuojausta ja IGBT:n liitoslämpötilan estimointia. Työ sisältää myös kirjallisuuskatsauksen muutamaan erilaiseen liitoslämpötilan mittaus- ja estimointimenetelmään, joita voi käyttää esimerkiksi taajuusmuuttajassa. Työn tarkoituksena oli selvittää taajuusmuuttajan ylilämpösuojauksen mitoituksen tarkkuutta ja riittävyyttä sekä kehittää liitoslämpötilan estimointimenetelmä, joka ei vaatisi paljon laskentatehoa. Ylilämpösuojauksen ja estimointimenetelmän toiminnan selvittämiseksi työssä mitattiin IGBT:n liitoslämpötilaa optisella lämpötilan mittauslaitteella. Optinen lämpötila-anturi liimattiin suoraan IGBT-alkion metalloinnin päälle mahdollisimman tarkan liitoslämpötilatiedon saamiseksi. Saaduista tuloksista todettiin, että ylilämpösuojaus sallii IGBT:n keskimääräisen liitoslämpötilan nousemisen noin 130 °C lämpötilaan ennen sen puuttumista taajuusmuuttajan toimintaan, mikä jättää liitoslämpötilan huippuarvolle vielä noin 45 °C marginaalin. Työssä ehdotetun estimointimenetelmän tarkkuudeksi todettiin mittauksien perusteella 4 kHz kytkentätaajuudella -1,4...2,3 °C ja koko kytkentätaajuusalueella oikosulkumoottorilla -0,4...5,1 °C ja tahtimoottorilla -1,1...5,8 °C. |
ED: | 2016-05-01 |
INSSI record number: 53455
+ add basket
« previous | next »
INSSI