search query: @keyword kestomagneettimoottori / total: 4
reference: 4 / 4
« previous | next »
Author: | Haavisto, Ari |
Title: | Kestomagnetoidun aksiaalivuomoottorin lämpenemän mallintaminen |
A Thermal Model for an Axial-Flux Permanent Magnet Machine | |
Publication type: | Master's thesis |
Publication year: | 2006 |
Pages: | 60 Language: fin |
Department/School: | Sähkö- ja tietoliikennetekniikan osasto |
Main subject: | Sähkömekaniikka (S-17) |
Supervisor: | Arkkio, Antero |
Instructor: | Lähteenmäki, Jussi |
Electronic version URL: | http://urn.fi/urn:nbn:fi:tkk-006151 |
OEVS: | Electronic archive copy is available via Aalto Thesis Database.
Instructions Reading digital theses in the closed network of the Aalto University Harald Herlin Learning CentreIn the closed network of Learning Centre you can read digital and digitized theses not available in the open network. The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/ You can read theses on the Learning Centre customer computers, which are available on all floors.
Logging on to the customer computers
Opening a thesis
Reading the thesis
Printing the thesis
|
Location: | P1 Ark S80 | Archive |
Keywords: | thermal network thermal model permanent magnet machine axial-flux machine lämpöverkko lämpömalli kestomagneettimoottori aksiaalivuomoottori |
Abstract (eng): | The aim of this stydy was to design a dynamic thermal model for axial-flux permanent magnet machine. The model can be used to design new cooling methods and constructions for this machine type. The model is a thermal network whose components are mainly based on the evidence of existing literature. The power losses in each part of the machine were assumed to be known. The dynamic model can be used to simulate cyclic loading and transient action. The thermal network is divided into six sectors, thereby enabling analysis of an asymmetric cooling system and construction. The model can be realised using either an APLAC® circuit simulator or Matlab® software. The heat transfer coefficients are defined from measured data. The effect of external ventilation is examined with measurements and modelling. The model also examines the effect of variation in parameters on thermal behaviour. Critical parameters are defined. The constructed model requires no heavy computing and runs efficiently on a microcomputer. The model can be modified and applied to different machine constructions. |
Abstract (fin): | Työn tavoitteena oli laatia dynaaminen lämpömalli kestomagnetoidulle aksiaalivuomoottorille. Mallin avulla voi mitoittaa kyseistä moottorityyppiä ja suunnitella sille uudenlaisia jäähdytysratkaisuja. Malli on lämpöverkko, jonka komponentit on ratkaistu kirjallisuuteen perustuen. Häviöt ja niiden jakaantuminen koneen osiin oletetaan tunnetuksi. Mallissa olevat lämpökapasitanssit mahdollistavat mallin käytön myös jaksollisessa käytössä. Jako kuuteen erilliseen lohkoon mahdollistaa epäsymmetristen rakenteiden ja jäähdytyksen tutkimisen. Malli ratkaistaan APLAC® -piirisimulaattorilla tai Matlab® -ohjelmistolla. Lämmönsiirtymiskertoimien määrittäminen on tehty lämpenemämittausten avulla. Ulkoisen puhaltimen vaikutus on kokeiltu mittauksin ja mallintaen. Mallin avulla on tarkasteltu myös häviöissä, ilmavirroissa ja lämmönsiirtymiskertoimissa olevien epätarkkuuksien vaikutusta käämityksen sekä muiden osien lämpötilaan. Laadittu malli ei vaadi suurta laskentatehoa, joten se toimii nopeasti mikrotietokoneissa. Se on helposti sovellettavissa ja muokattavissa erilaisiin moottorin rakenneratkaisuihin. |
ED: | 2006-02-23 |
INSSI record number: 32743
+ add basket
« previous | next »
INSSI