search query: @instructor Sivill, Arto / total: 4
reference: 4 / 4
« previous | next »
Author:Uusitalo, Hannu
Title:Design methods for joint of the steel-concrete composite column and WQ-beam
Liittopilarin ja WQ-palkin liitoksen mitoitusmenetelmät
Publication type:Master's thesis
Publication year:2007
Pages:100      Language:   eng
Department/School:Rakennus- ja ympäristötekniikan osasto
Main subject:Rakennusmateriaalitekniikka   (Rak-82)
Supervisor:Penttala, Vesa
Instructor:Sivill, Arto
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark TKK  1397   | Archive
Keywords:steel-concrete composite structures
RHS console
beam to column joint
non-linear FE-analysis
teräs-betoni liittorakenteet
RHS-putkikonsoli
pilari-palkki liitos
epälineaarinen FE-analyysi
Abstract (eng): The aim of this research was to find relevant design methods for an RHS console joint between the steel-concrete composite column and WQ-beam.
The RHS console joint was first compared to older Finnish joints type to be sure that it is the best possible joint type for the composite column and WQ-beam.
Also some non-Finnish joints were briefly compared to Finnish joints, but national conventions seemed to have an effect on which features are respected in joints.

The calculations were made according to Euro code 3, but in some cases Euro code did not provide relevant design methods for the RHS console joint.
Some other theories were used while calculating the surface yielding of the rectangular column and the RHS console's resistance for local transverse loads.
According to the calculations, both of these seemed to be very important for joint's capacity.

FE analyses were made with the program ABAQUS.
The results of the analyses were compared to the Euro code calculations.
A bilinear material model was used for steel in the analyses.
The RHS console resistance for local transverse loads seemed to be very critical in the FE analyses.
After this was found out, one experimental FE analysis was made where a stiffener plate was inserted inside to the RHS console.
This removed the problem of the local transverse load resistance and increased the capacity of the joint.

The results of this study indicate that Euro code 3 does not seem to have complete design formulae for the RHS console joint and thus design in some areas must be based on other theories and experiments.
Abstract (fin): Tämän työn tavoitteena oli selvittää sopivat mitoitusmenetelmät liittopilarin ja WQ-palkin väliselle RHS-putkikonsoliliitokselle.
Työn alussa RHS-putkikonsoliliitostyyppiä verrattiin muihin Suomessa käytettyihin WQ-palkin liitostyyppeihin ja varmistettiin että nykyinen RHS-konsoliliitos on paras liitostyyppi mitoitettavaksi.
Lisäksi myös ulkomaisia liitostyyppejä verrattiin RHS-liitokseen, mutta kansalliset rakennustavat ja -kulttuurit näyttävät vaikuttavan paljon siihen mitä ominaisuuksia liitostyypissä arvostetaan.

Laskelmat tehtiin pääsiassa Eurocoden mukaan, mutta kaikissa kohdissa Eurocode ei tarjonnut sopivia vaihtoehtoja mitoitukseen.
Neliöpilarin pinnan myötöä ja RHS-putkikonsolin ylälaipan kestävyyttä poikittaisille kuormille laskettaessa käytettiin muita lähteitä ja teorioita.
Laskelmien tulosten perusteella juuri nämä kaksi kohtaa vaikuttivat olevan liitoksen kaksi kriittisintä kohtaa.

Laskelmien tueksi liitoksista tehtiin elementtimenetelmällä tietokonemalleja ABAQUS ohjelmalla.
Mallien tuloksia verrattiin laskelmien tuloksiin.
Elementtimenetelmällä saadut tulokset osoittivat RHS-putkikonsolin ylälaipan kestävyyden kriittiseksi kohdaksi liitoksen kapasiteetin kannalta.
Tämän jälkeen tehtiin yksi kokeellinen malli, jossa RHS-putkikonsolin sisään laitettiin teräslevy pystyyn konsolia kuormittavan päätylevyn alle.
Tämän jälkeen ylälaipan kestävyys ei enää rajoittanut konsolin kapasiteettia, joka kasvoi huomattavasti.

Eurocode 3 ei näytä tarjoavan mitoitusmenetelmiä, jotka kattaisivat koko RHS-putkikonsoliliitoksen suunnittelun, joten osa suunnittelusta joudutaan tekemään muiden teorioiden ja kokeiden perusteella.
ED:2007-02-20
INSSI record number: 33115
+ add basket
« previous | next »
INSSI