search query: @keyword vuotovirta / total: 4
reference: 1 / 4
« previous | next »
Author:Lindqvist, Atte
Title:Prosessiventtiilien automaattisen koeponnistusjärjestelmän kehittäminen
Developing of automatic process valve testing system
Publication type:Master's thesis
Publication year:2010
Pages:96 s. + liitt. 11      Language:   fin
Department/School:Koneenrakennustekniikan laitos
Main subject:Koneensuunnitteluoppi   (Kon-41)
Supervisor:Pietola, Matti
Instructor:Enberg, Jari
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark Aalto  6951   | Archive
Keywords:hydraulic system
leak flow
pressure test
pressure control
hydraulijärjestelmä
koeponnistus
paineenhallinta
vuotovirta
Abstract (eng): This Master's Thesis was made for Metso Automation PLC valve assembly factory.
Job objective was to construct new automatic functions to the old test bench, to develop pressure control system and examine the possibility of automatically determine the integrity of the valve body and find the appropriate flow meter.

The work starts with a brief statement of Metso's test procedure.
After that has been done literature review about hydraulic elasticity, influence of temperature and measuring of flows to seek a suitable meter to measure the leak flow.

The development and automation of test bench was designed to be operated by three options, the selected one was controlling a pump based system.
Body integrity was examined on the basis of good literature review for hydraulic elasticity.
The test apparatus was built to a small segment valve test bench.
The device was made to work with hydraulic valves alternately laboratory and production use.

Automation was implemented with (USB) connected data acquisition interface and graphical programming language Labview.
With program was built a simple interface, which made possible to control all of the functionality of the device.

The pump system proved to be effective solution, and the pressure control worked as expected.
Correcting the pressure of the valve caused by the leak of the valve was stable basis of the test results, and the desired pressure level at pressure test was reached quickly.
It is possible to check the integrity of the valve by following the decrease of body pressure basis on initial test results, but test bench mechanical properties must be developed.
With segment valves leakage may be limited on the surface of the valve, not any drops but only wet surface.
The change of temperature causes problems too, when testing integrity of the body.
Solution may be increased test time or use of more accurate meters.
Tested leak flow measuring Coriolis massflowmeter works fine as part of test bench system.
Abstract (fin): Diplomityö tehtiin Metso Automation Oyj:n venttiilien kokoonpanotehtaalle.
Työn tavoitteena oli konstruoida vanhaan koeponnistuspenkkiin automaattisia toimintoja, kehittää paineenhallintamenetelmä ja tutkia mahdollisuutta selvittää venttiilin pesän eheys automaattisesti sekä löytää sopiva vuotovirtamittari.

Työn alussa on lyhyt selostus Metson koeponnistuskäytännöstä.
Sen jälkeen on tehty kirjallisuusselvitystä hydraulijärjestelmän joustosta, lämpötilan vaikutuksesta sekä virtausten mittaamisesta venttiilin vuotovirran mittaamiseen soveltuvien mittareiden löytämiseksi.

Koeponnistuslaitteiston kehittämiseksi ja automatisoimiseksi on suunniteltu kolme vaihtoehtoa, joista toteutettavaksi valittiin pumpun ohjaamiseen perustuva järjestelmä.
Pesän eheyden selvittämistä on tutkittu kirjallisuusselvityksen perusteella hyvältä vaihtoehdolta vaikuttavan hydraulisen jouston perusteella.
Testilaitteisto rakennettiin pienten segmenttiventtiilien koeponnistuslaitteistoon.
Laite saatiin toimimaan hydrauliventtiilien avulla vuorottain laboratorio- ja tuotantokäytössä.

Automatisointi toteutettiin usb-liitäntäisen tiedonkeruukortin ja graafisen ohjelmointikielen Labviewin avulla.
Ohjelmalla rakennettiin yksinkertainen käyttöliittymä, jolla on mahdollista ohjata kaikkia laitteen toimintoja.

Pumpun ohjaamiseen perustuva järjestelmä osoittautui toimivaksi ratkaisuksi, ja paineen hallinta sillä toimii odotusten mukaisesti.
Venttiilin vuodosta aiheutuvan paineen laskun korjaaminen on testitulosten perusteella vakaata, ja haluttu painetaso painetestissä saavutetaan nopeasti.
Venttiilin pesän eheys on mahdollista selvittää alustavien tutkimusten perusteella seuraamalla paineen laskua, mutta koeponnistuslaitteen mekaanisia ominaisuuksia pitää kehittää.
Segmenttiventtiileillä vuoto saattaa olla vähäistä, eikä venttiilin pinnalle muodostu pisaroita vaan venttiili ainoastaan kostuu.
Myös lämpötilan muutos aiheuttaa hankaluuksia pesän eheyttä testattaessa.
Ratkaisuksi voidaan pidentää testausaikaa tai käyttää tarkempia mittareita.
Testattu vuotovirtaa mittaava Coriolis massavirtausmittari toimii hyvin osana koeponnistusjärjestelmää.
ED:2010-10-22
INSSI record number: 41182
+ add basket
« previous | next »
INSSI