search query: @keyword simultaanisuunnittelu / total: 4
reference: 1 / 4
« previous | next »
Author: | Sundberg, Kimmo |
Title: | Nosturin nostovaunun valmistettavuuden arviointi ja kehittäminen |
Evaluation and development of manufacturability of a hoisting trolley | |
Publication type: | Master's thesis |
Publication year: | 2011 |
Pages: | 91 Language: fin |
Department/School: | Koneenrakennustekniikan laitos |
Main subject: | Tuotantotekniikka (Kon-15) |
Supervisor: | Aaltonen, Kalevi |
Instructor: | Kaiturinmäki, Jari ; Pantsar, Ville |
OEVS: | Electronic archive copy is available via Aalto Thesis Database.
Instructions Reading digital theses in the closed network of the Aalto University Harald Herlin Learning CentreIn the closed network of Learning Centre you can read digital and digitized theses not available in the open network. The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/ You can read theses on the Learning Centre customer computers, which are available on all floors.
Logging on to the customer computers
Opening a thesis
Reading the thesis
Printing the thesis
|
Location: | P1 Ark Aalto | Archive |
Keywords: | simultaneous engineering mass customization configuration modularity DFM DFA simultaanisuunnittelu massaräätälöinti konfigurointi modulointi DFM DFA |
Abstract (eng): | In this Thesis the following themes are examined: product architecture, modularity, customer oriented mass customization and taking manufacturability and ease of assembly into account when designing products and services. Also studied is the way these terms associate and their common denominator, simultaneous engineering. Definitions, main principles and ways of action will be explored from the published literature for each of these methods. Small scale analyses of manufacturability and ease of assembly of a new hoisting trolley design by Konecranes will also be presented as a practical example. Cost efficiency of design and manufacturing of products and services are increasingly important factors for a company's success in present day. Simultaneous engineering, modularity, customer specific mass customization and consideration for manufacture and assembly in design are all methods for increasing cost efficiency. The rapid evolution of information technology and data systems has opened a lot of new opportunities for developing product modularity and mass customization by using various configurators. Mass customizing products and services has increased exceedingly lately and one will encounter mass customization products almost everywhere, even though one will not usually pay much attention to that. It is very important to consider manufacturing and assembly already at the early stages of product design. This is usually not a very easy task especially for products that are large in size and consist of a large number of components. One of the main goals of this Thesis was to analyse the manufacturability and ease of assembly of the first production versions of a new hoisting trolley by Konecranes and also to compare it to the previous generation product. |
Abstract (fin): | Tässä työssä tarkastellaan tuotearkkitehtuuria, modulointia, asiakaskohtaista massaräätälöintiä, sekä valmistettavuuden ja kokoonpantavuuden huomioonottamista tuotteen tai palvelun suunnittelussa. Työssä myös käsitellään näiden liittymistä toisiinsa sekä niiden yhteiseen nimittäjään, simultaanisuunnitteluun. Jokaiselle menetelmälle etsitään julkaistusta kirjallisuusmateriaalista määritelmät ja keskeiset periaatteet sekä toimintatavat. Käytännön osuutena työssä on Konecranesin uuteen nosturimallin kuuluvan nostovaunun valmistettavuuden ja kokoonpantavuuden analysointi. Nykyaikana kustannustehokas tuotteiden ja palveluiden suunnittelu sekä valmistus ovat yhä tärkeämpiä tekijöitä yrityksen menestyksessä. Simultaanisuunnittelu, modulointi, asiakaskohtainen massaräätälöinti sekä valmistuksen ja kokoonpanon huomioonottaminen suunnittelussa ovat keinoja parantaa kustannustehokkuutta. Tietojärjestelmien kehittyminen on avannut paljon uusia mahdollisuuksia kehittää tuotteiden modulaarisuutta, sekä sitä kautta niiden massaräätälöintiä muun muassa erilaisten konfiguraattoreiden avulla. Massaräätälöinti on viime aikoina lisääntynyt tuotteiden ja palveluiden myynnissä erittäin paljon ja nykyään massaräätälöintiin törmää lähes kaikkialla, vaikka siihen ei välttämättä tule kiinnitettyä huomiota. Valmistettavuuden ja kokoonpantavuuden huomioonottaminen on erittäin tärkeää jo suunnittelun aikaisessa vaiheessa. Tämä ei kuitenkaan ole aina helppo tehtävä varsinkaan suurille ja paljon komponentteja sisältäville tuotteille. Tämän työn yhtenä päätavoitteena oli Konecranesin uuden nostovaunun ensimmäisten tuotantokappaleiden yhteydessä tehtävä valmistettavuuden ja kokoonpantavuuden arviointi, sekä vertailu edellisen sukupolven tuotteeseen. |
ED: | 2011-11-23 |
INSSI record number: 43027
+ add basket
« previous | next »
INSSI