search query: @keyword Siporex / total: 4
reference: 4 / 4
« previous | next »
Author:Hanka, Janne
Title:Höyrykarkaistun kevytbetonilaatan standardoidun mitoituskäytännön kelpoistaminen Siporex-laatalle
Validation of a standardized design method for loadbearing Siporex-slabs of autoclaved aerated concrete
Publication type:Master's thesis
Publication year:2012
Pages:168 + [66]      Language:   fin
Department/School:Rakennustekniikan laitos
Main subject:Talonrakennustekniikka   (Rak-43)
Supervisor:Puttonen, Jari
Instructor:Fromholtz, Terho ; Koponen, Antti
Electronic version URL: http://urn.fi/URN:NBN:fi:aalto-201305163152
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark Aalto     | Archive
Keywords:Siporex
autoclaved aerated concrete
slab
shear
anchorage
EN 12602
pre-stress
CE-marking
Siporex
höyrykarkaistu kevytbetoni
laatta
leikkaus
ankkurointi
EN 12602
esijännitys
CE-merkintä
Abstract (eng): Aim of this master's thesis was to validate that European standard EN 12602 for reinforced components made of autoclaved aerated concrete can be applied to Siporex-slabs made in Finland.
Upcoming European regulation for construction products requires that products that belong to the area of harmonized standards must be labelled with CE-markings.
For Siporex-slabs CE-marking requires, that the manufacturer is responsible for the loadbearing design of the product according to the design methods described in EN 12602.
At the moment Siporex-slabs are designed according to their own design manual.
Changing of the design manual brings up many questions that need solving.
This master's thesis seeks answers for few of them.

Responsibilities of the manufacturer affiliated with the CE-marking and the design of autoclaved aerated concrete (AAC) slabs in the ultimate and the serviceability state according to EN 12602 were studied.
Effects, causes and testing methods fore-stress phenomena in AAC-slabs were also studied.

Summary of old testing data for Siporex-slabs was prepared from years 1999-2011.
Testing data included load· and pre-stress tests according to EN 1738.
Recommended value for relative length difference epsilon0 that used in the pre-stress calculations was derived from the pre-stress tests.

Two sets of load test for Siporex-slabs were conducted.
In the first set applicability of the anchorage design model given in the EN 12602 was studied by testing 11 Siporex-slabs.
Amounts of cross bars used for anchorage were varied the slabs in order to study its effects on failure load.
All tests ended in shear-or anchorage failure.
Tests showed that the amount of crossbars had a significant affect to the failure loads and the anchorage design model given in the EN 12602 described the actual structure quite well.

In the second load test applicability of the shear capacity equation given in the EN 12602 was studied with 7 Siporex-slabs.
Variation of the test results were studied by using slabs that were manufactured in different months.
All tests ended in shear failure.
Ratio between the characteristic shear resistance derived from the test and EN 12602 calcuted value was Rtest/Rmodel=1,1.
Coefficient of test results variation was Vx=0,056, thus the variation of the test results were quite small.
Conclusion was made that the calculation model for shear resistance given in the EN 12602 corresponded with the test results well.

Lastly summary of different material parameters according to the test results was gathered.
Summary was used for a design calculation according to EN 12602 for the slab that was under consideration in the experimental part.
Results of the calculation showed that all the requirements in the ultimate and the serviceability state were met.
Abstract (fin): Tämän diplomityön tavoitteena on ollut selvittää voidaanko höyrykarkaistuille kevytbetonilaatoille tehtyä Eurooppalaista standardia EN 12602 soveltaa suomalaisiin Siporex-laattoihin. 1.7.2013 voimaan tuleva rakennustuoteasetus edellyttää, että harmonisoitujen tuotestandardien piiriin kuuluvat rakennustuotteet varustetaan CE-merkinnällä.
Siporex-laattojen tapauksessa CE-merkintä edellyttää, että valmistaja vastaa tuotteen kantavuudesta tuotestandardin EN 12602 mukaisilla mitoitusmenettelyillä.
Tähän päivään asti Siporex-laatat on mitoitettu niille kehitetyllä Siporex-kevytbetonilementtien suunnitteluohjeella.
Mitoitukseen käytettävän ohjeen vaihdos tuo mukanaan kysymyksiä joista osaan haettiin tässä diplomityössä vastausta.

Työssä selvitettiin CE-merkintään liittyvät valmistajan velvollisuudet ja höyrykarkaistusta kevytbetonista (AAC) valmistettujen laattojen mitoitusmenettely murto- ja käyttörajatilassa standardin EN 12602 mukaan.
Työssä keskityttiin myös AAC-laattoihin syntyvän esijännityksen syihin ja sen hyödyntämiseen mitoituksessa sekä esijännityksen kokeellinen todentaminen.

Työssä koottiin yhteen Siporex-laattojen vuosina 1999 - 2011 tehdyt laadunvalvontakokeiden tulokset, joihin on kuulunut elementtien kuormituskokeita ja teräsjännitysmittauksia.
Teräsjännitysmittausten yhteenvedosta saatiin suositusarvo laskelmissa käytettävälle esijännityksen suunnitteluarvolle.

Työssä tutkittiin Siporex-laattoja kahdella koesarjalla.
Ensimmäisessä koesarjassa tutkittiin EN 12602:ssa annettua ankkurointikestävyyden laskentamallia koestamalla 11 Siporex-laattaa.
Kokeessa tutkittiin poikittaisten ankkurointiterästen lukumäärän vaihtelun vaikutusta murtokuormaan.
Koelaattojen murtotapoja olivat joko leikkaus tai ankkurointimurto.
Koetulokset osoittivat, että poikittaisterästen lukumäärällä oli merkittävä vaikutus murtokuormaan ja standardissa EN 12602:ssa annettu ankkuroinnin laskentamalli vastasi todellisen rakenteen koetuloksia melko hyvin.

Toisessa koesarjassa tutkittiin soveltuuko EN 12062:ssa esitetty leikkauskestävyyden yhtälö Siporex-laatoille kuormittamalla 7 koelaattaa leikkausmurtoon.
Koetulosten ja materiaaliominaisuuksien hajontaa tutkittiin keräämällä eri kuukausina valmistettuja laattoja tehtaan varastosta.
Kaikkien koelaattojen murtotapa oli leikkausmurto.
Koetulosten ominaisarvon suhde EN 12602 laskennalliseen ominaisarvoon oli Rtest/Rmodel=1,1.
Koetulosten variaatiokerroin Vx oli 0,056, eli koetulosten hajonta oli melko pientä.
Johtopäätöksenä todettiin, että EN 12602:ssa annettu leikkauskestävyyden laskentamalli vastasi todellisen rakenteen koetuloksia melko hyvin.

Lopuksi työssä koottiin yhteenveto kokeellisesti määritetyistä materiaaliparametreista EN 12602 mukaiseen mitoituslaskelmaan tutkitulle Siporex-laatalle.
Mitoituslaskelma osoitti, että kaikki murto- ja käyttörajatilan vaatimukset täyttyivät.
ED:2012-09-07
INSSI record number: 45223
+ add basket
« previous | next »
INSSI