search query: @keyword ratapenger / total: 4
reference: 1 / 4
« previous | next »
Author:Jaakkonen, Juha
Title:Osavarmuus- ja kokonaisvarmuusmenettelyn vaikutus vanhojen kriittisten ratapenkereiden laskennalliseen varmuustasoon
Stability analysis of existing old railway embankments using partial and total safety factor methods
Publication type:Master's thesis
Publication year:2013
Pages:91 + [22]      Language:   fin
Department/School:Yhdyskunta- ja ympäristötekniikan laitos
Main subject:Pohjarakennus ja maamekaniikka   (Rak-50)
Supervisor:Korkiala-Tanttu, Leena
Instructor:Heikkilä, Jaakko ; Malmivaara, Kari-Matti
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark Aalto     | Archive
Keywords:finite element methods
limit equilibrium methods
stability
railway embankment
partial factor method
reliability-based design
Spencer
elementtimenetelmä
FEM
lamellimenetelmä
LEM
stabiliteetti
ratapenger
osavarmuusmenetelmä
todennäköisyystarkastelu
RBD
Abstract (eng): A slope stability analysis according to Euro code differs from the former Finnish geotechnical design.
Now the calculation is based on partial safety factors as the former it was based on the using of total safety factor.
The purpose of this thesis was to study how partial safety factor method differs from the total safety factor method when calculating the stability of a railway embankment.

The calculations were made accordingly to the euro code and Finnish Transport Agency's geotechnical design guides (national annex), which define how railway embankments' stability analysis should be accomplished in Finland.
The calculations were performed for three different test sites.
Most analyses were based on the traditional limit equilibrium method (LEM) but in one site finite element method (FEM) analysis was made.
For each test site railway loads levels, the embankments heights and shear strengths of clay were varied.
Calculations were done using phi=0 analysis and undrained shear strength.

In the first part of this study includes basic theory of LEM and FEM and descriptions of the calculation programs used.
The later part of this study includes descriptions of the test sites, made calculations and calculation results.
Simple reliability based design (RBD) analyses were done by varying the undrained shear strength of clays.

Based on the calculations the partial safety factor method seemed to give overall slightly smaller safety margin than the total safety factor method.
However in the most critical conditions, where railway loads were significant, the safety margin of the method was almost the same.
RBD method was found to be suitable for detecting significant parameters in terms of stability.
Abstract (fin): Uusi eurokoodin mukainen stabiliteettitarkastelu poikkeaa aikaisemmin Suomessa käytetyistä.
Eurokoodin mukainen laskenta tehdään osavarmuusmenettelyllä kokonaisvarmuusmenettelyn sijaan.
Tässä työssä on tutkittu vanhojen ratapenkereiden stabiliteetin laskentaa osa- ja kokonaisvarmuusmenetelmällä.
Laskenta tehtiin Liikenneviraston kansallisen liitteen suunnitteluohjeen mukaisesti.
Liikenneviraston ohjeistus ohjaa ratapenkereiden suunnittelua Suomessa.

Diplomityössä tehtiin laskelmia kolmesta eri ratapengerkohteesta.
Suurin osa laskelmista tehtiin lamellimenetelmää (LEM) käyttäen, mutta yhdessä kohteessa tehtiin vertailulaskelmia myös elementtimenetelmänä (FEM).
Laskelmissa käytettiin erilaisia junakuormia. pengerkorkeutta ja koheesiomaiden leikkauslujuutta.
Laskelmat tehtiin käyttäen fii=0 analyysia ja saven lujuutena käytettiin suljettua leikkauslujuutta.

Työn alkupuolella käytiin läpi yleistä LEM ja FEM menetelmiin liittyvää teoriaa ja käytettyjä laskentaohjelmia.
Työn loppupuolella käydään läpi pengerkohteet, laskelmat. sekä laskennan tuloksia.
Työssä tehtiin myös yksinkertainen todennäköisyystarkastelu (RBO), varioiden saven suljettua leikkauslujuutta tilastollisin menetelmin.

Laskentojen perusteella osavarmuusmenetelmällä määritetty varmuus on yleisesti hieman pienempi kuin mitä aikaisemmin on totuttu.
Kuitenkin mitoittavimmissa tapauksissa missä ulkoiset kuormat ovat merkittäviä, osavarmuusmenetelmän varmuustaso on lähes sama verrattuna kokonaisvarmuusmenetelmään.
Todennakkisyyspohjaisen tarkastelun todettiin soveltuvan stabiliteetin kannalta merkittävämpien parametrien tunnistamiseen ja näiden tutkintaan.
ED:2013-09-24
INSSI record number: 47238
+ add basket
« previous | next »
INSSI