search query: @keyword processing / total: 4
reference: 3 / 4
« previous | next »
Author:Möttönen, Mikko Tapani
Title:Suihkuinjektoinnissa syntyvän paluuvirtauslietteen jatkokäsittelymahdollisuudet
Development of backflow treatment in jet grouting
Publication type:Master's thesis
Publication year:2013
Pages:82 + [1]      Language:   fin
Department/School:Rakennustekniikan laitos
Main subject:Pohjarakennus ja maamekaniikka   (Rak-50)
Supervisor:Korkiala-Tanttu, Leena
Instructor:Vunneli, Juha
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark Aalto     | Archive
Keywords:equipment
grout
HDI
improvement
processing
reclaimed concrete
slurry
soilcrete
waste treatment
water removal
water separation
betonijäte
betonimurske
injektointi
jalostus
jätteenkäsittely
kehittäminen
laadunvarmistus
laitteisto
liete
maabetoni
patoseinä
suihkupaalutus
uusiomateriaali
vedenerotus
Abstract (eng): Jet grouting is a method that is used in situ to create soilcrete columns consisting of soil and cement.
A negative aspect of the method is backflow slurry that is created in the process.
In this study, new ways of reducing and treating the backflow were examined.

The goal of the study was to find out new options for placement and utilization of the slurry and to examine and compare the possibilities to apply them in practice.
This study explored the jet grouting method as well as the laws, ruling and current practice concerning the backflow treatment.
Three new possible treatment options were being examined.
Firstly, the study investigated the process of using the hardened backflow as a material for crushed concrete.
Secondly, the equipment used in treating the slurry wall material was examined to find out if it is applicable in jet grouting method.
Thirdly, the properties of the grout and the backflow were being measured to study the use of backflow as a material for waterproof underground walls.

The study explained the requirements for the process of manufacturing and using of crushed concrete in terms of legislation.
In addition, the study indicated that it may be possible to use the slurry wall equipment for recycling the material used in jet grouting.
The empiric tests indicated that the jet grouting backflow can be applied as a material for waterproof underground walls when the ground properties are of certain type.
Abstract (fin): Suihkuinjektointi on injektointimenetelmä, jolla voidaan valmistaa työmaaolosuhteissa maa-aineksesta ja sementistä koostuvia matalalujuuksisia betonipilareita.
Suihkuinjektoinnin ohessa syntyvä paluuvirtausliete on yksi menetelmän haittapuolista.
Tässä tutkimuksessa etsittiin uusia keinoja paluulietteen määrän vähentämiselle sekä sen jatkokäsittelylle.

Tutkimuksen tavoitteena oli löytää lietteelle vaihtoehtoisia loppusijoituspaikkoja ja hyödyntämismenetelmiä sekä tutkia ja vertailla vaihtoehtojen soveltamismahdol1isuuksia.
Tutkimuksessa perehdyttiin suihkuinjektointimenetelmään sekä paluuvirtauslietteen käsittelyyn liittyviin saannoksiin, ohjeisiin ja nykyisiin toimintatapoihin.
Esiin nousseiden kehittämisvaihtoehtojen pohjalta tarkasteltiin kolmea mahdollista käsittelymenetelmää.
Kirjallisuusosiossa tutkittiin sitoutuneen betonijätteen murskaamista ja jatkokäyttöä betonimurskeen materiaalina sekä bentoniittilietteen kierrättämiseen suunniteltujen laitteistojen soveltuvuutta suihkuinjektoinnissa syntyvän paluulietteen käsittelyyn.
Empiirisessä osiossa tutkittiin sementtimassalle ja paluulietteelle suoritettavien mittausten avulla lietteen soveltumista vedenpitävän patoseinän materiaaliksi.

Tutkimus selvitti, millä edellytyksillä injektointilietteen sitouttaminen ja murskaaminen sekä lopputuotteena saatavan betonimurskeen tuotteistaminen ja käyttö on lainsäädännön puitteissa mahdollista.
Lisaksi tutkimus osoitti, että bentoniittilietteen kierrätyslaitteistot soveltuvat tietyin varauksin myös suihkuinjektointilietteen käsittelyyn.
Suihkuinjektointi- ja injektointistandardeihin perustuvat empiiriset kokeet osoittivat, että paluuliete soveltuu patoseinämateriaaliksi tietyissä maaperäolosuhteissa.
ED:2013-09-30
INSSI record number: 47279
+ add basket
« previous | next »
INSSI