search query: @keyword integroidut piirit / total: 40
reference: 6 / 40
Author: | Kekkonen, Kalle |
Title: | Rajoittavan vahvistimen integrointi 60 GHz radiovastaanottimeen |
Integrated Limiting Amplifier for a 60 GHz Radio Receiver | |
Publication type: | Master's thesis |
Publication year: | 2008 |
Pages: | 52 Language: fin |
Department/School: | Elektroniikan, tietoliikenteen ja automaation tiedekunta |
Degree programme: | Elektroniikan ja sähkötekniikan tutkinto-ohjelma |
Main subject: | Mikro- ja nanotekniikka (S-87) |
Supervisor: | Halonen, Kari |
Instructor: | Saari, Ville |
Electronic version URL: | http://urn.fi/urn:nbn:fi:tkk-012036 |
OEVS: | Electronic archive copy is available via Aalto Thesis Database.
Instructions Reading digital theses in the closed network of the Aalto University Harald Herlin Learning CentreIn the closed network of Learning Centre you can read digital and digitized theses not available in the open network. The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/ You can read theses on the Learning Centre customer computers, which are available on all floors.
Logging on to the customer computers
Opening a thesis
Reading the thesis
Printing the thesis
|
Location: | P1 Ark S80 | Archive |
Keywords: | limiting amplifier baseband CMOS technology radio receiver integrated circuits rajoittava vahvistin kantataajuus CMOS-teknologia radiovastaanotin integroidut piirit |
Abstract (eng): | There already coexist several wireless communications systems at frequencies lower than 10 GHz. At a higher 60-GHz frequency range, there is an unlicensed band offering the possibility of data communication at high data rates. During recent years, 60-GHz radio circuits have raised extensive research interest in academia. In small distances, 60-GHz radios can be utilized, for example, in wireless local area network (WLAN) applications. Formerly, high frequency circuits could be integrated only in expensive processes unsuitable for mass production. With the diminishing channels lengths of transistors, it has become possible to implement also 60-GHz circuits in a CMOS technology, which enables the integration of a whole radio transceiver on a single chip. In this Master's Thesis, a wideband limiting amplifier was designed and implemented as a part of the baseband circuit of a single-chip 60-GHz radio receiver in a modern 65-nm CMOS technology. In the receiver, the limiting amplifier operates as a 1-bit analog-to-digital converter (ADC). The implemented receiver is aimed at wideband wireless communications systems in which constant-envelope modulation techniques are utilized. The target was to achieve a 2-GHz signal bandwidth leading to a 1-GHz bandwidth requirement for the I/Q baseband channels of the receiver. In this thesis, it was challenging to compromise with the required gain and the bandwidth of the limiting amplifier. The simulated gain and the bandwidth of the designed limiting amplifier are 32 dB and 1.1 GHz, respectively. According to the simulation results, the targeted performance of the limiting amplifier was achieved. |
Abstract (fin): | Matalammilla alle 10 GHz taajuuksilla käydään kovaa kilpailuaradiotaajuusalueista. Korkeammalla 60 GHz taajuusalueella on edelleen tilaajärjestelmille, joilla tavoitellaan suuria tiedonsiirtonopeuksia. Viime vuosien aikana on aktiivisesti tutkittu 60 GHz radiopiirejä. Pienillä etäisyyksillä laajakaistainen langaton lähiverkko (WLAN) on hyvin mahdollinen sovelluskohde. Korkeilla taajuuksilla on aikaisemmin ollut ongelmana tekniikoiden kalleus massatuotteita ajatellen. Viivanleveyden pienentyessä on tullut mahdolliseksi toteuttaa myös 60 GHz piirejä CMOS-teknologialla, joka mahdollistaa koko radion integroinnin yhdelle puolijohdepalalle. Tässä diplomityössä suunniteltiin ja toteutettiin laajakaistainen rajoittavavahvistin osaksi yhdelle mikrosirulle integroidun 60 GHz radiovastaanottimenkantataajuusosia modernilla 65 nm CMOS-teknologialla. Rajoittavan vahvistimen tehtävänä on toimia yksibittisenä analogia-digitaalimuuntimena. Vastaanotinta on tarkoitus hyödyntää sellaisissa laajakaistaisissa tiedonsiirtojärjestelmissä, joissa käytetään vakioverhokäyräisiä modulaatiomenetelmiä. Suunnitellussa vastaanottimessa tavoitteena oli saavuttaa 2 GHz signaalikaistanleveys, joka tarkoittaa 1 GHz kaistanleveysvaatimusta I- ja Q-haaran kantataajuusosille. Työssä haastavinta oli löytää sopiva kompromissi rajoittavan vahvistimen vahvistuksen ja kaistanleveyden välille. Rajoittavalle vahvistimelle saatiin vahvistusta 32 dB ja sen kaistanleveydeksi simuloitiin 1,1 GHz. Simulointituloksien perusteella tavoitteissa onnistuttiin hyvin. |
ED: | 2008-09-16 |
INSSI record number: 36242
+ add basket
INSSI