search query: @supervisor Vepsäläinen, Pauli / total: 48
reference: 9 / 48
« previous | next »
Author:Kärki, Iikka
Title:Suljetun leikkauslujuuden määritys rataympäristössä
Determination of undrained shear strength in railway environment
Publication type:Master's thesis
Publication year:2010
Pages:52 s. + liitt. 18      Language:   fin
Department/School:Yhdyskunta- ja ympäristötekniikan laitos
Main subject:Pohjarakennus ja maamekaniikka   (Rak-50)
Supervisor:Vepsäläinen, Pauli
Instructor:Heikkilä, Jaakko
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark Aalto     | Archive
Keywords:undrained shear strength
CPTU
Perniö
suljettu leikkauslujuus
CPTU
Perniö
Abstract (eng):The purpose of this thesis is to compare definitions of undrained shear strength with different in-situ and laboratory research methods. Undrained shear strength is determined with field vane shear test or calculated from either tip resistance or porewater pressure obtained from CPTU penetration test equipped with sensitive probe.



The undrained shear strengths determined from same points with different methods are compared to evaluate reliability of different methods. The comparison was done on 4 different railway environments to observe a broader range on Finnish clays. In Perniö examined clay was soft and normally consolidated, between Tampere-Seinäjoki was silty clay, and between Kotka-Kouvola overconsolidated clay and between Turku-Uusikaupunki the clay was very soft and fat.



In addition, between Turku and Lieto, on highway 9 comparisons was made between undrained shear strengths obtained with fall cone test and calculated from reconsolidation pressures obtained from CRS-tests.



According to this study undrained shear strengths obtained with different in-situ and laboratory research methods are very similar at least on normally consolidated, soft clay. In overconsolidated clay the results were unconsistent or there were difficulties to determine undrained shear strength at all.
Abstract (fin):Tässä diplomityössä tutkitaan suljetun leikkauslujuuden määritystä erilaisilla in-situ ja laboratoriotutkimusmenetelmillä. Suljettu leikkauslujuus määritellään siipikairauksesta saatavasta siipikairauslujuudesta ja herkällä kärjellä tehtävästä CPTU-kairauksen kärkivastuksesta ja huokospaineesta. Lisäksi lujuuksia vertaillaan myös laboratoriokokeiden avulla määritettyihin suljettuihin leikkauslujuuksiin.



Eri tavoin saatuja suljettuja leikkauslujuuksia vertailtiin pistekohtaisesti CPTU-kairauksesta saatavan suljetun leikkauslujuuden luotettavuuden arvioimiseksi. Mahdollisimman kattavan otoksen saamiseksi Suomen savista vertailut tehtiin neljältä rataosalta eri puolilta Suomea. Perniössä tutkittiin pehmeää normaalikonsolidoitunutta, savea, Tampere-Seinäjoki ratavälillä silttistä savea, Kotka-Kouvola ratavälillä ylikonsolidoitunutta savea ja Turku-Uusikaupunki ratavälillä erittäin pehmeää, lihavaa savea.



Turku-Lieto valtatie 9 osuudella vertailtiin kartiokokeilla määritettyjä suljettuja leikkauslujuuksia CRS-kokeiden esikonsolidaatiojännityksestä laskettuihin suljettuihin leikkauslujuuksiin.



Tutkimusaineiston perusteella eri tutkimusmenetelmillä saadut suljetut leikkauslujuudet vastaavat hyvin toisiaan ainakin normaalikonsolidoituneessa, kohtalaisen pehmeässä savessa. Ylikonsolidoituneessa savessa eri tutkimustuloksilla määritellyt suljetut leikkauslujuudet erosivat merkittävästi toisistaan tai niitä ei saatu luotettavasti määriteltyä.
ED:2010-07-13
INSSI record number: 39927
+ add basket
« previous | next »
INSSI