search query: @keyword NiTi / total: 5
reference: 2 / 5
« previous | next »
Author:Ojala, Juho
Title:Suitability of nickel-titanium for creating distraction force in implantable devices used in the treatment of bone deformities
Nikkeli-titaaninin soveltuvuus distraktiovoiman tuottamiseen luuston epämuodostumien korjaushoidossa käytettävissä aktiivisissa implanteissa
Publication type:Master's thesis
Publication year:2010
Pages:[7] + 79      Language:   eng
Department/School:Elektroniikan, tietoliikenteen ja automaation tiedekunta
Main subject:Elektroniikan valmistustekniikka   (S-113)
Supervisor:Paulasto-Kröckel, Mervi
Instructor:Vuorinen, Vesa
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark Aalto     | Archive
Keywords:NiTi
TiNi
nickel-titanium
bone deformities
distraction osteogenesis
implantable devices
actuators
induction heating
radio-frequency heating
NiTi
TiNi
nikkeli-titaani
luuston epämuodostumat
distraktio-osteogeneesi
implantoitavat laitteet
aktuaattorit
induktiolämmitys
induktiokuumennus
Abstract (eng): Devices currently available for the treatment of bone deformities are either not fully implantable or do not provide sufficient mechanical performance to treat all patients.
The main challenge in creating fully implantable devices is the contradicting requirements of small space available and high maximum force output.

Nickel-titanium is biocompatible and produces both large strains and high stresses upon actuation, and is therefore a lucrative candidate for the production of distraction force in fully implantable devices.
The suitability of nickel-titanium for that purpose was investigated in this study.

The study was conducted in two parts.
The first part focused on the mechanical performance that can be acquired from nickel-titanium when working in a temperature range possible in the human body.
It was performed with an experimental setup built within this work.

The second part of the study focused on selective heating of nickel-titanium inside an implantable device and the distribution of heat during a heating cycle.
Both were studied in an environment mimicking an implantable device.
The former investigation was done using an experimental setup built within this work, while the latter was done by means of finite element modeling.

According to the results, nickel-titanium appears to be suitable for the production of distraction forces in fully implantable devices used for the treatment of cranial deformities.
Treatment of limb length discrepancy, scoliosis and lower jaw deformities would require better actuation performance than what was obtained in this study.
Abstract (fin): Nykyiset luuston epämuodostumien korjaushoitoon saatavilla olevat laitteet eivät joko ole kokonaan implantoitavia tai tarjoa riittävää mekaanista suorituskykyä kaikkien potilaiden hoitamiseen.
Vähäiseen käytettävissä olevaan tilaan nähden suuret vaatimukset laitteen voimantuotolle ovat keskeinen haaste kokonaan implantoitavan laitteen toteutuksessa.

Nikkeli-titaani on bioyhteensopivaa ja pystyy tuottamaan samanaikaisesti suuria jännityksiä ja venymiä.
Siitä syystä se on houkutteleva vaihtoehto distraktiovoiman tuottamiseen kokonaan implantoitavissa laitteissa.
Tässä tutkimuksessa tutkittiin nikkeli-titaanin soveltuvuutta tuohon tarkoitukseen.

Tutkimus suoritettiin kahdessa osassa.
Ensimmäinen osa keskittyi suorituskykyyn, joka voidaan nikkeli-titaanista saada toimittaessa kehon sisäisessä laitteessa mahdollisella lämpötila-alueella.
Kokeet suoritettiin tämän työn osana valmistetulla koeasetelmalla.

Tutkimuksen toinen osa käsitteli nikkeli-titaanin selektiivistä lämmittämistä kehon sisäisessä laitteessa, ja lämmön leviämistä lämmityksen yhteydessä.
Niitä tutkittiin implantoitavaa laitetta muistuttavassa asetelmassa.
Ensimmäinen tehtiin tämän työn puitteissa valmistetussa koeasetelmassa, ja jälkimmäinen tehtiin soveltaen elementtimenetelmään perustuvaa mallinnusta.

Tulosten mukaan nikkeli-titaani näyttää soveltuvan distraktiovoiman tuottamiseen kallon epämuodostumien korjaushoidossa käytettävissä laitteissa.
Raajojen erimittaisuuden, skolioosin ja alaleukaluun epämuodostumien korjaushoidossa tarvittaisiin parempaa suorituskykyä, kuin mihin tässä tutkimuksessa päästiin.
ED:2011-03-07
INSSI record number: 41555
+ add basket
« previous | next »
INSSI