search query: @instructor Salo, Jouni / total: 5
reference: 3 / 5
« previous | next »
Author:Perttala, Otto
Title:Kuonan muodostaman autogeenivuorauksen reaktiot uunin seinällä
Reactions of freeze-lining on furnace's surface
Publication type:Master's thesis
Publication year:2014
Pages:ix + 100 s. + liitt. 138      Language:   fin
Department/School:Materiaalitekniikan laitos
Main subject:Materiaalien prosessointi   (MT3002)
Supervisor:Taskinen, Pekka
Instructor:Pihlasalo, Jouni ; Jäfs, Mikael ; Hellstén, Niko
Electronic version URL: http://urn.fi/URN:NBN:fi:aalto-201501301784
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark Aalto  2540   | Archive
Keywords:freeze-lining
delafossite
magnetite
copper oxide
annealing
delafossiitti
magnetiitti
kuparioksidi
hehkutus
Abstract (eng):The objective of the thesis was to study experimentally how a freeze-lining structure, which was formed on cold metal surface, changes or develops with over one hour of annealing at a temperature lower than normal process conditions on hot surface of copper flash smelting furnace.
Duration of annealing and sample compositions were taken into consideration when the assessment of samples' microstructure took place.

There were six samples to be annealed with different compositions.
The copper concentrations of the samples varied between 21.5-38.0 wt%.
From each of the samples, two pieces were cut for annealing.
First of the pieces was annealed for 24 hours and the second for 192 hours.
An annealing temperature of 900 °C was chosen.
The actual annealing took place in a horizontal tube furnace with silicon carbide resistor in argon atmosphere (99.99 % Ar).
The hot samples were let to cool down slowly in normal atmosphere after the annealing.
Images were then taken from the annealed samples with SEM, and EDS analysis was performed for specific parts of the samples in order to find out the element composition.
Lastly, the 24 hour, the 192 hour, and unannealed samples were compared together to see if there was any changes or development in the microstructure due to the annealing.

The most significant finding of the thesis was growth of delafossite in the samples due to annealing.
Also, in the samples where delafossite needles were present, shrinkage of the needles were detected, as a consequence of the annealing.
Because of the increase of the delafossite, the fraction of magnetite in the samples decreased.
The annealing affected also the growth of the copper oxide.
The increased quantity of the copper oxide manifested itself especially in more sizeable copper oxide grains in the glass matrix in the annealed samples.

A noteworthy observation was made in copper oxide penetration of refractory lining with the high copper concentration samples.
Due to the extended annealing, the copper oxide penetrated the refractory lining more intensively and with larger quantities.
Abstract (fin):Työn tarkoituksena oli tutkia kokeellisesti, miten kuparin liekkisulatuksessa kylmän metallipinnan päälle muodostuneen kuonan autogeenikerroksen, eli freeze liningin rakenne muuttuu ja kehittyy yli 1 h altistuksella, uunin kuumalla pinnalla ja arvioida näin prosessilämpötilaa matalamman hehkutuslämpötilan ja eri hehkutusaikojen vaikutuksia freeze liningin mikrorakenteisiin eri pitoisissa näytteissä.

Hehkutettavia, eri kuparipitoisuuden omaavia näytteitä oli kaikkiaan kuutta erilaista.
Näytteiden kuparipitoisuudet vaihtelivat välillä 21,5-38,0 p-%.
Kustakin näytteestä leikattiin kaksi näytepalaa, joista toista hehkutettiin yhden vuorokauden ajan ja toista kahdeksan vuorokautta.
Hehkutuksiin valittiin 900 °C:n lämpötila.
Hehkutukset suoritettin vaakatasossa olevalla, piikarbidivastuksella (SiC) kuumennettavalla putkiuunilla, argon-atmosfäärissä (99,99 % Ar).
Hehkutuksen jälkeen näytekappaleet sammutettiin hiljalleen huoneenlämmössä.
Tämän jälkeen kukin näyte kuvattiin SEM:lla ja valituista kohdista otettiin alkuaineanalyysit EDS-menetelmällä.
Yhden vuorokauden hehkutettua näytettä, kahdeksan vuorokautta hehkutettua näytettä ja hehkuttamatonta näytettä verrattiin lopuksi keskenään, jotta saataisiin selville mahdolliset hehkutuksen aiheuttamat muutokset mikrorakenteissa.

Tärkeimpänä havaintona työssä voidaan pitää delafossiitin määrällinen kasvu hehkutuksen johdosta.
Näytteissä, joissa esiintyi delafossiittineulasia, huomattiin myös neulasten kutistumista hehkutusajan kasvaessa.
Delafossiitin määrällisen kasvun johdosta magnetiitin määrä pieneni näytteissä.
Hehkutus vaikutti myös kuparioksidin määrään kasvattavasti.
Tämä näkyi etenkin lasimatriisin seassa olevien kuparioksidirakeiden kasvuna.

Merkittävä havainto tutkimustuloksista tehtiin kuparioksidin tunkeutumisesta vuoraustiileen kor-keakuparisissa näytteissä.
Hehkutuksen johdosta kuparioksidi tunkeutui vuoraustiileen yhä syvemmälle ja yhä suurempina määrinä.
ED:2015-02-08
INSSI record number: 50535
+ add basket
« previous | next »
INSSI