search query: @supervisor Luomi, Jorma / total: 59
reference: 1 / 59
« previous | next »
Author: | Partanen, Pauli Tapio |
Title: | Lämpöputki ja jäähdytysrivasto taajuusmuuttajan jäähdytyksessä |
Heat pipe and heat sink in frequency converter cooling | |
Publication type: | Master's thesis |
Publication year: | 2011 |
Pages: | viii + 66 Language: fin |
Department/School: | Sähkötekniikan laitos |
Main subject: | Tehoelektroniikka (S-81) |
Supervisor: | Luomi, Jorma |
Instructor: | Elo, Markku |
OEVS: | Electronic archive copy is available via Aalto Thesis Database.
Instructions Reading digital theses in the closed network of the Aalto University Harald Herlin Learning CentreIn the closed network of Learning Centre you can read digital and digitized theses not available in the open network. The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/ You can read theses on the Learning Centre customer computers, which are available on all floors.
Logging on to the customer computers
Opening a thesis
Reading the thesis
Printing the thesis
|
Location: | P1 Ark Aalto 1276 | Archive |
Keywords: | heat pipe heat sink frequency converter thermal resistance heat flux density lämpöputki jäähdytysrivasto taajuusmuuttaja lämpövastus lämpövuon tiheys |
Abstract (eng): | This master's thesis deals with the cooling capabilities of heat pipe cooling elements and heat sinks in frequency converters. Also the relevant theoretical background of thermodynamics, component heating, heat sinks, heat pipes and fans has been provided. Measurement results of two heat pipe cooling elements in a wind tunnel and of a heat sink in a frequency converter have been used. In addition the operation of a heat pipe cooling element in a frequency converter has been simulated. According to the results the heat pipe cooling elements have a much greater cooling capability than the heat sink. The better cooling capabilities of the heat pipe cooling elements come with a much greater cost than the heat sink. It is possible to make the frequency converter smaller using heat pipes instead of a heat sink. Using heat pipes it is possible to design the heat exchanger so that its pressure lost is as small as possible. This enables the use of a smaller fan. |
Abstract (fin): | Tässä työssä on tutkittu lämpöputkijäähdytyselementtien ja jäähdytysrivastojen jäähdytyskykyä taajuusmuuttajissa. Lisäksi on kerrottu taajuusmuuttajan jäähdytyksen kannalta oleellinen teoreettinen tausta lämpöopista, komponenttien lämpenemisestä, jäähdytysrivastoista, lämpöputkista ja puhaltimista. Työssä on käytetty mittaustuloksia kahdesta lämpöputkijäähdytyselementistä tuulitunnelissa ja yhdestä jäähdytysrivastosta taajuusmuuttajassa. Lisaksi on simuloitu lämpöputkijäähdytyselementin toimintaa taajuusmuuttajassa. Tulosten perusteella lämpöputkijäähdytyselementeillä voidaan jäähdyttää paljon tehokkaammin kuin jäähdytysrivastolla. Lämpöputkijäähdytyselementtien paremmasta jäähdytyskyvystä joudutaan kuitenkin maksamaan paljon suurempi hinta kuin jäähdytysrivastosta. Käyttämällä taajuusmuuttajan jäähdytyksessä lämpöputkia voidaan laitteesta tehdä pienempi kuin jos jäähdytyksessä käytettäisiin jäähdytysrivastoa. Lämpöputkiratkaisulla voidaan lämmönvaihto suunnitella siten, että sen painehäviö on mahdollisimman pieni, jolloin voidaan käyttää pienempää puhallinta. |
ED: | 2011-10-26 |
INSSI record number: 42890
+ add basket
« previous | next »
INSSI