search query: @keyword secondary heat / total: 6
reference: 4 / 6
« previous | next »
Author:Haikonen, Turo
Title:Biopolttoaineen aumakuivauksen toimivuuden ja kannattavuuden arviointi
Drying of the biofuel pile - evaluation of functionality and profitability
Publication type:Master's thesis
Publication year:2005
Pages:77+9      Language:   fin
Department/School:Konetekniikan osasto
Main subject:Energiatalous ja voimalaitostekniikka   (Ene-59)
Supervisor:Ahtila, Pekka
Instructor:Holmberg, Henrik
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark TKK  6455   | Archive
Keywords:pile drying
biofuel
CHP
secondary heat
kekokuivaus
biopolttoaine
CHP
sekundäärilämpö
Abstract (eng): The objective of the thesis was to investigate biofuel drying in a pile and its' functionality and profitability.
The investigated biofuel pile is situated at the yard of the CHP-power plant owned by Kokkolan Voima Oy.
Many advantages are achieved my means of drying biofuel, among others improved heating value and better storability.

The literature survey done in this thesis focused on the things affecting both the biofuel drying in a pile and the dry matter loss of biofuel during pile storage.
It was found in the literature, that the dry matter loss is 2-5 % per month during the first 1-2 months and after that approximately 1 % per month.
These values are valid, when biofuel is dried without air fans.
There were not given any values for dry matter loss during the pile drying of biofuel with air fans in the literature.

As a result of drying, the energy content of biofuel increases and the cost estimate is based on this increment.
Moisture samples were taken from the pile to find out the amount of evaporated water during the drying period.
Moisture samples gave also the moisture distribution both in cross-section and in lengthwise direction of the pile.
As a result of drying, the energy content of biofuel increases approximately 2780 MWh in Kokkola.
This increment is used to reduce the amount of peat as a power plant fuel.
The emissions of carbon dioxide from peat burning also decrease.
Cost estimate takes into account, that by drying a pile with air fans the dry matter loss of biofuel is less than by drying without air fans.
According to the cost estimate the payback period of the drying equipment is approximately 14-15 years.

A test rig was built in the laboratory to simulate the pile drying in Kokkola.
The influence of volume flow, drying temperature and the volume of the pile on the drying time of biofuel was investigated.
According to the results the volume flow and the volume of a pile affect significantly the drying time of biofuel in a pile.
Abstract (fin): Tämän työn tarkoituksena oli tutkia biopolttoaineen aumakuivauksen toimivuutta ja kannattavuutta.
Tutkimuksen kohteena oleva biopolttoaineauma sijaitsee Kokkolan Voima Oy:n kaukolämpölaitoksen pihalla.
Biopolttoaineen kuivauksen tekee mielenkiintoiseksi se, että kuivauksella saavutetaan monia hyötyjä mm. biopolttoaineen lämpöarvo ja varastoitavuus paranevat.

Työssä tehtiin kirjallisuuskatsaus, jonka tarkoituksena oli selvittää biopolttoaineen aumakuivumiseen vaikuttavia asioita sekä aumassa syntyvien kuiva-ainetappioiden suuruutta.
Kirjallisuuskatsauksen perusteella auman kuiva-ainetappiot ovat ensimmäisien 1-2 kuukauden aikana 2-5 % ja tämän jälkeen n. 1 % kuukaudessa auman kuivuessa ilman puhaltimia.
Kirjallisuuskatsauksen perusteella ei löytynyt kuiva-ainetappiolle arvoa auman puhallinkuivauksessa.

Työssä esitetty kustannustarkastelu perustuu kuivauksen seurauksena nousevaan biopolttoaineen energiasisältöön, jonka laskenta on suoritettu aumasta haihtuneen vesimäärän mukaan.
Haihtuneen vesimäärän selvittämiseksi aumasta otettiin kosteusnäytteet, joiden perusteella määritettiin myös kosteusjakauma sekä auman pituussuunnassa että auman poikkileikkauksessa.
Kuivauksen seurauksena biopolttoaineen energiasisältö nousee n. 2 780 MWh.
Tällä määrällä korvataan turvetta, jolloin sekä turpeen käyttö että turpeen polton CO2-päästöt vähenevät.
Kustannuslaskelmassa huomioitiin, että koneellisen kuivauksen seurauksena auman kuiva-ainetappiot ovat pienemmät kuin ilman koneellista kuivausta.
Kustannuslaskelman perusteella kuivauslaitteiston takaisinmaksuaika on n. 14 - 15 vuotta.

Työn aikana rakennettiin laboratorioon pienoismalli Kokkolan aumakuivurista.
Mallin avulla tutkittiin kuivausilman tilavuusvirran ja lämpötilan sekä auman koon vaikutusta biopolttoaineen aumakuivumiseen.
Laboratoriokokeiden perusteella kuivausilman tilavuusvirran nostaminen ja auman tilavuuden pienentäminen lyhentävät biopolttoaineen kuivumisaikaa merkittävästi.
ED:2005-04-16
INSSI record number: 28302
+ add basket
« previous | next »
INSSI