search query: @instructor Ranta, Anja / total: 6
reference: 3 / 6
« previous | next »
Author:Viitanen, Lassi
Title:Vedyn paikalliseen elektrolyyttiseen tuottamiseen perustuvan polttokenno-hybridijärjestelmän ohjaus
Control of a fuel cell - hybrid system based on in-situ electrolytic production of hydrogen
Publication type:Master's thesis
Publication year:2010
Pages:ix + 54 + liitt. (+14)      Language:   fin
Department/School:Elektroniikan, tietoliikenteen ja automaation tiedekunta
Main subject:Automaatiotekniikka   (AS-84)
Supervisor:Halme, Aarne
Instructor:Ranta, Anja
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark Aalto  7638   | Archive
Keywords:electrolysis
PEM
fuel cell
fuel cell system
simulation model
hybrid
control system
elektrolyysi
PEM
polttokenno
polttokennojärjestelmä
simulointimalli
hybridi
ohjausjärjestelmä
Abstract (eng): The IPPES-project develops a small scale fuel cell power source for portable electronic appliances.
The system being developed is composed of a PEM fuel cell, a methanol electrolyser and an ultra capacitor.
System can he operated in both active and passive hybrid configurations.

In this thesis a simulation model and a control system for IPPES system were developed.
The model and control system were implemented in LabVIEW environment.
The test system was controlled via USB I/O module.
The control system controls the hydrogen production rate of the electrolyser, chooses between hybrid configuration modes and if necessary controls the operating point of the fuel cell.

The control system was tested with both the simulation model and the test system.
It operated correctly in both environments: system worked as expected and the operating point of the fuel cell was kept in the permitted zone.
Simulated results were similar to those measured from the test system.
Abstract (fin): IPPES -projektissa kehitetään pienikokoista polttokennotehonlähdettä pienelektroniikan sovelluksiin.
Projektissa kehitettävä polttokennojärjestelmä on PEM -polttokennosta, metanolielektrolyyseristä ja superkondensaattorista koostuva hybridijärjestelmä.
Kokoonpano mahdollistaa sekä aktiivisen että passiivisen hybridikonfiguraation käytön.

Tässä diplomityössä laadittiin IPPES järjestelmän prototyypin simulointimalli ja ohjausjärjestelmä.
Simulointimalli ja ohjausjärjestelmä toteutettiin LabVIEW ohjelmistolla.
Koejärjestelmää ohjattiin PC-tietokoneen ja USB-liitäntäisen I/O -laitteen avulla.
Toteutettu ohjausjärjestelmä ohjaa elektrolyyserin vedyn tuotantoa. valitsee kulloinkin käytettävän hybridimuodon ja säätää tarvittaessa polttokennon toimintapistettä.

Ohjausjärjestelmän toimintaa testattiin sekä simulointimallin että koejärjestelmän yhteydessä.
Toteutettu ohjausjärjestelmä kykeni molemmissa tapauksissa suoriutumaan tehtävästään: pitämään järjestelmän toiminnassa ja polttokennon toimintapisteen halutulla alueella.
Simuloimalla saadut tulokset vastasivat koejärjestelmällä saatuja tuloksia.
ED:2010-09-22
INSSI record number: 40923
+ add basket
« previous | next »
INSSI