search query: @keyword pressure control / total: 6
reference: 3 / 6
Author: | Komu, Maria |
Title: | Painekalibrointijärjestelmä avaruusinstrumenttien testauslaboratorioon |
Pressure Calibration System for Space Instruments' Testing Laboratory | |
Publication type: | Master's thesis |
Publication year: | 2013 |
Pages: | viii + 73 s. + liitt. 16 Language: fin |
Department/School: | Radiotieteen ja -tekniikan laitos |
Main subject: | Avaruustekniikka ja -tiede (ETA3001) |
Supervisor: | Hallikainen, Martti |
Instructor: | Genzer, Maria |
Electronic version URL: | http://urn.fi/URN:NBN:fi:aalto-201304161900 |
OEVS: | Electronic archive copy is available via Aalto Thesis Database.
Instructions Reading digital theses in the closed network of the Aalto University Harald Herlin Learning CentreIn the closed network of Learning Centre you can read digital and digitized theses not available in the open network. The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/ You can read theses on the Learning Centre customer computers, which are available on all floors.
Logging on to the customer computers
Opening a thesis
Reading the thesis
Printing the thesis
|
Location: | P1 Ark Aalto 903 | Archive |
Keywords: | space technology pressure control pressure measurement pressure calibration avaruustekniikka paineensäätö paineen mittaus painekalibrointi |
Abstract (eng): | Finnish Meteorological Institute has built and delivered pressure measurement instruments for many planetary landers and the development of these instruments is still ongoing. Calibration and testing of the instruments is done in-house in FMI's space instrument calibration laboratory with dedicated pressure calibration equipment. The goal of this master's thesis was to find out if the pressure controller of the calibration laboratory can be replaced with a commercial solution. The work began by defining the requirements for the new pressure controller and finding out available commercial controllers. Two controllers were then selected and acquired for testing in FMI's laboratory. During the tests the operation of both controllers was checked in pressure conditions which will be used in future tests of pressure instruments. Pressure controllers were also connected to a computer and automated control programs were run remotely. Final result of this thesis was that one of the controllers passed all the tests and was recommended for the calibration laboratory. |
Abstract (fin): | Ilmatieteen laitos on rakentanut ja toimittanut paineenmittausinstrumentteja useisiin planeettaluotaimiin ja instrumenttien kehitys jatkuu edelleen. Näiden instrumenttien testausta ja kalibrointia varten IL:n avaruuslaboratoriossa on oma painekalibrointijärjestelmä. Tämän opinnäytetyön tavoitteena oli selvittää, onko paineensäätöjärjestelmä mahdollista korvata kaupallisella ratkaisulla. Tässä työssä määriteltiin vaatimukset paineensäätimelle, tutustuttiin kaupallisten paineensäätimien tarjontaan ja hankittiin kaksi paineensäädintä testattavaksi IL:n avaruuslaboratorioon. Paineensäätimille suoritettiin suuri määrä käyttötestejä, joilla haluttiin varmistaa säätimen toiminta kaikissa olosuhteissa, joita paineinstrumenttien testien aikana tullaan tarvitsemaan. Paineensäätimet myös yhdistettiin etäyhteydellä tietokoneeseen ja niillä suoritettiin automaattisesti paineensäätöohjelmia, jotka jäljittelivät paineinstrumenttien testejä. Toinen paineensäätimistä täytti lopulta kaikki asetetut vaatimukset ja tämän työn lopputuloksena ehdotettiin tämän säätimen hankintaa Ilmatieteen laitoksen avaruuslaboratorioon. |
ED: | 2013-05-21 |
INSSI record number: 46729
+ add basket
INSSI