search query: @keyword joint / total: 6
reference: 1 / 6
« previous | next »
Author:Salmi, Mikko Matias
Title:Teollisuuspystyvaihteen liitosrajapintojen ja tuennan lujuustarkastelu
Stress analysis of the mounting and the connection interfaces of vertically supported industrial gear
Publication type:Master's thesis
Publication year:2014
Pages:viii + 107 s. + liitt. 12      Language:   fin
Department/School:Insinööritieteiden korkeakoulu
Main subject:Lujuusoppi   (K3006)
Supervisor:Tuhkuri, Jukka
Instructor:Huuskonen, Mikko ; Hämäläinen, Juhani
Electronic version URL: http://urn.fi/URN:NBN:fi:aalto-201410042702
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark Aalto  4306   | Archive
Keywords:indutrial gear
finite element method
stress analysis
joint
teollisuusvaihde
elementtimenetelmä
lusuustarkastelu
liitos
Abstract (eng):This Master's thesis was carried out on behalf of Moventas Santasalo Ltd.
The main emphasis was on researching connection interfaces and the mounting methods of a vertically supported industrial gear by means of Mechanics of Materials.
The purpose was to find out what kind of jointing methods where best for the investigated problem.
Another key objective was to determine which of the seven alternative mounting configurations is the most suitable for defined operation criteria.

The studying of shaft connections was carried out by the analytical method and finite element method.
Analytical methods were created for bolt connection and pin-bolt connection based on the theoretical framework presented in section 3.
These methods can be used for pre-design purposes also in the future.
Pin-bolt and shrink disk connections were analyzed by using the finite element method.

The behavior of the mounting configurations were researched under two different load cases.
The configurations were compared according to the stress distribution of the gear housing, support forces and reaction forces of the bearings.

Based on the analysis of the results, the implementation suggestions for the shaft jointing and gear mounting methods are presented.
Abstract (fin):Tämä diplomityö tehtiin Moventas Santasalo Oy:lle.
Työn tarkoituksena oli tutkia teollisuuspystyvaihteen liitosrajapintoja ja tuentaa lujuusopillisin keinoin.
Tarkoituksena oli selvittää, mitä tapoja vaihteen toisioakselin ja käyttölaitteen akselin liittämiseen on olemassa, sekä mitkä näistä tavoista soveltuvat parhaiten tutkitun pystyvaihteen tapaukseen.
Vaihteen tuennan tutkimisen tavoitteena oli määrittää, minkälainen tuentatapa seitsemästä erilaisesta tuentakonfiguraatiosta on soveltuvin lähtötietojen asettamaan tilanteeseen.

Akseleiden liitostavoissa keskityttiin korkean vääntömomentinvälityskyvyn omaaviin menetelmiin.
Liitostapoja, jotka soveltuivat tutkitun vaihteen luomiin rajoituksiin, tutkittiin joko analyyttisesti tai elementtimenetelmällä tai näiden tapojen yhdistelmällä.
Analyyttiset laskentamallit luotiin teoriaosuuden pohjalta pulttiliitokselle sekä sokka-pulttiliitokselle, ja kyseisiä mitoitusohjeita voidaan käyttää jatkossakin muodoltaan pyöreiden liitosten esimitoitukseen.
Elementtimenetelmällä tutkittuja liitostapoja olivat sokka-pulttiliitos sekä puristuskiekkoliitos.

Tuentakonfiguraatioiden käyttäytymistä tutkittiin kahdessa erillisessä kuormitustilanteessa elementtimenetelmällä.
Vertailtavia ominaisuuksia olivat vaihteen kotelon kuormittuminen, kotelon tukivoimat sekä laakereihin aiheutuvat reaktiovoimat.
Tulosten analysointiin pohjautuen työssä esiteltiin akselien liittämistekniikka sekä vaihteen tuentatapa, joilla pystyttiin vastaamaan vaadittuihin kriteereihin.
ED:2014-10-05
INSSI record number: 49763
+ add basket
« previous | next »
INSSI