search query: @keyword kalibrointi / total: 67
reference: 41 / 67
« previous | next »
Author:Perttilä, Juha
Title:Kalibrointimenetelmä ja -laitteisto virtausmittarina toimivalle säätöventtiilille
Calibration method and system for a control valve as a flow meter
Publication type:Master's thesis
Publication year:2003
Pages:78      Language:   fin
Department/School:Konetekniikan osasto
Main subject:Konepajatekniikka   (Kon-15)
Supervisor:Aaltonen, Kalevi
Instructor:Kirmanen, Jari
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark TKK  2423   | Archive
Keywords:control valve
flowmeter
calibration
säätöventtiili
virtausmittaus
kalibrointi
Abstract (eng): Almost invariably all of the flows in process industry are controlled by control valves and measured by flow meters.
A control valve can also be used as a flow meter when the pressure differential over the valve and inherent flow characteristic are known.
Calibration of the flow meter is a precondition for accurate flow measurement.
The purpose of this thesis is to determine the basis of the calibration system for a control valve used as a flow meter.

The principle of flow measurement when using a control valve as a flowmeter is presented in this work.
Also the calibration system is introduced.
In addition to the modem flow meter methods the methods for the pressure differential flow meters are studied in the beginning of literature research.
After that the basis of pipeline design and devices which develop flows are introduced.
Also the general guidelines for calibration of measuring devices are concerned.

The flow passing through a control valve can be calculated with standardized valve sizing formulas.
The accuracy of the flow calculations based on the sizing formulas was studied in laboratory experiments.

Based on the literature research and the laboratory experiments a calibration system, including a preliminary cost calculation, was designed for a control valve used as a flow meter.
Abstract (fin): Prosessiteollisuuden virtauksia säädetään lähes poikkeuksetta säätöventtiileillä ja virtausmääriä mitataan virtausmittareilla.
Säätöventtiiliä voidaan myös käyttää virtausmittaukseen, kun venttiilin yli vaikuttava paine-ero ja venttiilin ominaiskäyrä tunnetaan.
Tarkan virtausmittauksen edellytyksenä on virtausmittarin kalibrointi.
Tämän työn tarkoituksena on selvittää perusteet kalibrointijärjestelmälle, jossa kalibroidaan virtausmittareina toimivia säätöventtiileitä.

Työssä kerrotaan perusteet säätöventtiilin avulla suoritettuun virtausmittaukseen sekä esitellään virtausmittarina toimivan säätöventtiilin kalibrointilaitteisto.
Kirjallisuustutkimuksen alussa selvitetään paine-eroon perustuvien virtausmittausmenetelmien lisäksi nykyaikaisia virtausmittausmenetelmiä.
Kirjallisuustutkimuksessa käsitellään myös prosessiteollisuuden putkiston suunnittelun perusteet sekä laitteita, joilla saadaan virtauksia aikaiseksi.
Kirjallisuustutkimuksessa tarkastellaan lisäksi yleisiä perusteita mittauslaitteiden kalibroimiseksi.

Standardin mukaisilla venttiilin mitoitusyht1:iloilla voidaan venttiilin läpi kulkeva virtaus laskea aineen olomuodosta riippumatta.
Laboratoriokokeissa selvitettiin virtauslaskennan tarkkuus virtaavan väliaineen eri olomuodoille.

Kirjallisuustutkimuksen ja laboratoriokokeiden perusteella suunniteltiin kalibrointilaitteisto virtausmittarina toimivalle venttiilille ja tehtiin alustavat kustannuslaskelmat.
ED:2004-01-19
INSSI record number: 21113
+ add basket
« previous | next »
INSSI