search query: @keyword kalibrointi / total: 67
reference: 24 / 67
« previous | next »
Author:Laurén, Janne
Title:Kolmiakselisen kiihtyvyysanturin tuotantotestauksen optimointi
Optimizing Production Testing of Three-Axis Accelerometer
Publication type:Master's thesis
Publication year:2008
Pages:ix + 58      Language:   fin
Department/School:Elektroniikan laitos
Main subject:Mittaustekniikka   (S-108)
Supervisor:Ikonen, Erkki
Instructor:Valkama, Timo
Electronic version URL: http://urn.fi/urn:nbn:fi:tkk-012145
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark TKK  2950   | Archive
Keywords:testing
LabVIEW
calibration
accelerometer
testaus
kalibrointi
LabVIEW
kiihtyvyysanturi
Abstract (eng):Compact size and digital technology are the key factors in acceleration sensors today.
To maintain its position as a world's leading designer and manufacturer of silicon capacitive acceleration sensors VTI Technologies has developed a new digital three-axis accelerometer.
The purpose of this thesis work was to develop the mass production testing of this new digital sensor.

The literature part gives an overview of the VTI's new SCA3100 accelerometer and demands of production testing.
Also the automatic test equipment used on mass production is presented.

The implementation part presents the methods and achievements in software and algorithm development.
The emphasis of the work was in the decrease of the time used for testing, but also some improvement was needed in calibration accuracy.
The results of this work were better than expected.
When compared to original testing the calibration time was shortened a lot and the changes in calibration improved product's performance significantly.
Abstract (fin):Digitaalisuus ja pieni koko ovat ovat tämän hetken avainsanat tekniikan alalla.
Pysyäkseen mukana kovassa kilpailussa myös VTI Technologies Oy on kehittänyt uuden MEMS-tekniikalla valmistettavan digitaalisen kiihtyvyysanturin.
Tämän työn tarkoituksena oli kehittää VTI:n uuden digitaalisen kiihtyvyysanturikomponentin testausta massatuotannon vaatimalle tasolle niin kustannustehokkuuden kuin laadun ja suorituskyvyn osalta.
Kehitystarpeisiin sisältyi sekä testauksen nopeuttamista että sen tarkkuuden parantamista.

Työn alussa esitellään testauksen kohteena oleva kiihtyvyysanturikomponentin ominaisuudet ja rakenne.
Lisäksi käsitellään perusteet tuotteen valmistuksen eri vaiheista.
Tämän jälkeen tutustutaan tuotantotestaukseen, sen tarkoitukseen ja vaatimuksiin.
Lisäksi esitellään tuotantotestauksessa käytettävä testauslaitteisto.

Loppuosassa esitetään varsinaisen työn menetelmät ja saavutukset.
Parannuksissa kerrotaan millä tavoin tuotteen kalibroinnin tarkkuutta parannettiin kehittämällä kalibrointialgoritmeja.
Lisäksi kerrotaan miten testauksessa suoritettavia mittauksia nopeutettiin kehittämällä testausohjelman toimintaa niin ylätasolla kuin datankäsittelyssäkin.

Saavutetut tulokset olivat paremmat kuin alkuun osattiin kuvitella.
Työn avulla saatiin huomattavasti sekä parannettua tarkkuutta että lyhennettyä testiaikaa, kun verrataan tuloksia alkuperäiseen testaukseen.
ED:2008-09-16
INSSI record number: 36253
+ add basket
« previous | next »
INSSI