search query: @instructor Hirsi, Hannu / total: 67
reference: 17 / 67
Author: | Nordberg, Kai |
Title: | Puurakenteisten lisäkerrosten toteuttaminen betonielementtirunkoiseen asuinkerrostaloon |
Addiotional wooden floors to concrete element building | |
Publication type: | Master's thesis |
Publication year: | 2013 |
Pages: | 130 + [61] Language: fin |
Department/School: | Rakennustekniikan laitos |
Main subject: | Talonrakennustekniikka (Rak-43) |
Supervisor: | Puttonen, Jari |
Instructor: | Cronhjort, Yrsa ; Hirsi, Hannu |
OEVS: | Electronic archive copy is available via Aalto Thesis Database.
Instructions Reading digital theses in the closed network of the Aalto University Harald Herlin Learning CentreIn the closed network of Learning Centre you can read digital and digitized theses not available in the open network. The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/ You can read theses on the Learning Centre customer computers, which are available on all floors.
Logging on to the customer computers
Opening a thesis
Reading the thesis
Printing the thesis
|
Location: | P1 Ark Aalto | Archive |
Keywords: | extension additional floor wood structure TES concrete element building lisärakentaminen lisäkerros puurakenne TES betonielementtirunkoinen asuinkerrostalo |
Abstract (eng): | The aim of this Master's thesis was to develop a wooden structure system suitable for building additional floors and to produce model solutions for this purpose. The thesis was made as a part of an international research group SmartTES by Aalto University. In this research group the aim has been to further develop the TES Energy Facade wooden renovation system and to develop a structural system for extensions in relation with TES facade renovation. Therefore a wooden based facade renovation in relation with extensions was also touched in this Master's thesis. This thesis was focused on how to realize two additional wooden floors structurally and how to integrate HVAC systems in structures in relation with extensions. The main target group was Finnish concrete element buildings from 1960'S and 70's. The characters of these original buildings cause limitations for building extensions and therefore these were studied in the beginning of the process. The structural realization of the additional floors was analysed with calculations as well as the connection to the original building. A model building was used to illustrate problems that may occur when planning extensions. The model solutions were however developed to generic solutions that would be suitable for most of the buildings in the target group. A so called worst case analysis was used in the research work to reach the generic results. By using this analysis the results and solutions formed in the planning process became universal to the other buildings as well. The characteristic structures and details specific just for extensions were studied. These kinds of details are mostly the joints and connections between the old and new building envelope and details where HVAC systems need to be integrated. In this thesis research the additional floors are suggested to be realized on a specific adjustment structure that will transfer the loads of the additional floors directly to the old concrete walls. That was used as a generic principle because usually the old roof structure cannot stand for the loads of two additional floors. Primarily the Kerto Ripa open and closed panels were studied as the adjustment structure. Comparative capacity calculations of these structures were made for different load distributions. By doing wind calculations for an extended building it was also found out that the stiffening walls in additional floors needs to be anchored to the old building. At the same time it was stated that the old concrete walls however don't need to be reinforced when installing two additional floors. The capacity of foundations was studied generally but not numerically. As a result of this thesis the generic model solutions from structural details and HVAC integrations were designed. |
Abstract (fin): | Tämän työn tavoitteena oli kehittää puiseen lisäkerrosrakentamiseen soveltuva rakennejärjestelmä ja sen esimerkkirakenneratkaisut. Työ tehtiin osana Aalto-yliopiston kansainvälistä SmartTES-tutkimushanketta, jossa tavoitteena on ollut kehittää puuperusteista TES-julkisivukorjausjärjestelmää sekä siihen liittyvää rakennusten laajentamiseen soveltuvaa puuperusteista rakennejärjestelmää. Sen vuoksi tässä diplomityössä sivuttiin myös puuperusteisen julkisivukorjauksen liittymistä lisäkerrosrakentamiseen. Työssä tutkittiin korkeintaan kahden puisen lisäkerroksen toteuttamista rakenneteknisesti sekä lisäksi tutkittiin LVI-tekniikan integrointia rakenteisiin lisäkerrosrakentamisen yhteydessä. Työssä keskityttiin 1960- ja 1970-1ukujen betonielementtirunkoisiin asuinkerrostaloihin, joista selvitettiin niiden ominaisuudet ja lisäkerrosrakentamiselle aiheutuvat rajoitukset. Tämän jälkeen laskennallisesti tarkasteltiin puisten lisäkerrosten rakenneteknistä toteutusta ja liittymistä alkuperäiseen rakennukseen. Työssä käytettiin apuna esimerkkirakennusta, jonka tavoitteena oli havainnollistaa lisäkerrosrakentamisessa esille tulevia ongelmakohtia. Työn tuloksena toteutetut malliratkaisut kehitettiin kuitenkin yleispäteviksi niin, että ne soveltuvat mahdollisimman suureen osaan kohdeaikakauden asuinrakennuksista. Ratkaisujen yleispätevyyden saavuttamiseksi jokaisen tarkastelun ja laskennan lähtökohtia muutettiin siten, että ratkaisu soveltuisi myös muihin kuin laskennan lähtökohtana olevaan rakennukseen. Työssä tarkasteltiin rakenteita ja yksityiskohtia, jotka nimenomaan lisäkerrosrakentamiselle ovat ominaisia. Näitä ovat etenkin liittymät uuden ja vanhan rakenteen välissä sekä kohdat ilmanvaihdon ja viemäreiden integroinnille. Työssä päädyttiin lisäkerrosten toteuttamiseen niin sanotun välitilarakenteen päälle. Lisäkerrosten kuormat siirretään siten suoraan alkuperäisille kantaville seinälinjoille, sillä yleensä alkuperäinen kantava yläpohjarakenne ei kanna kahden lisäkerroksen kuormia. Välitilarakenteena tutkittiin ensisijaisesti Kerto-Ripa-laattaa, jolle tehtiin vertailevia kantavuuslaskelmia eri kuormitustapauksilla. Muilla laskelmilla todettiin myös, että lisäkerrosten jäykistävät seinät on ankkuroitava alkuperäiseen rakennukseen, mutta alkuperäisiä kantavia betoniseiniä ei useimmiten tarvitse vahvistaa kahden lisäkerroksen tapauksessa. Perustusten kantavuutta tarkasteltiin yleisellä tasolla, mutta ei laskennallisesti. Työn tuloksena syntyivät yleispätevät esimerkkiratkaisut puisen lisäkerrosrakentamisen oleellisista rakenteista, rakenteellisista yksityiskohdista sekä LVI tekniikan integroinnista. |
ED: | 2013-06-14 |
INSSI record number: 46880
+ add basket
INSSI