search query: @keyword 3D-CAD / total: 7
reference: 1 / 7
« previous | next »
Author: | Valo, Joonas |
Title: | Varastohyllystön automatisoitu suunnittelu |
Automated design of storage rack | |
Publication type: | Master's thesis |
Publication year: | 2013 |
Pages: | 64 + [4] Language: fin |
Department/School: | Koneenrakennustekniikan laitos |
Main subject: | Koneensuunnitteluoppi (Kon-41) |
Supervisor: | Juhanko, Jari |
Instructor: | Auvinen, Janne |
OEVS: | Electronic archive copy is available via Aalto Thesis Database.
Instructions Reading digital theses in the closed network of the Aalto University Harald Herlin Learning CentreIn the closed network of Learning Centre you can read digital and digitized theses not available in the open network. The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/ You can read theses on the Learning Centre customer computers, which are available on all floors.
Logging on to the customer computers
Opening a thesis
Reading the thesis
Printing the thesis
|
Location: | P1 Ark Aalto 5891 | Archive |
Keywords: | 3D-modeling configuration design automation 3D-CAD 3D-mallinnus konfigurointi suunnittelun automatisointi |
Abstract (eng): | 3D modelling has been increasingly replacing 2D methods as a mechanical design method over two decades. This thesis is based on the transition from 2D CAD to a 3D CAD system in a company which delivers material handling systems for the manufacturing industry. Along with the transition, the company decided to investigate whether parametric 3D CAD design and design automation can be exploited in the company's design processes. The aim of the thesis is to develop a design system for efficient 3D modelling. The object of modelling is a storage rack in an automated storage system, which is one of the products manufactured by this company. The main idea of 3D modelling system is to exploit the product parameters and design automation. The objective is to create 3D models that fulfil the design requirements of storage system quotations. The time goal is set to produce a 3D model within one working day. The requirement for the manufacturing design is that the models produced for the quotation stage are manually modifiable. The result of the thesis is an automated design system which enables 3D modelling of the main components of a storage rack 'within less than one working day. The automated design system was executed by linking Microsoft Excel workbook with Creo 3D CAD program through a COM interface. The selected method can be considered reasonable when compared with alternative methods, due to the cost savings and especially the potential for further development. The created design system fulfils the requirements set both by the company's quotation and manufacturing design procedures. |
Abstract (fin): | Käytettynä suunnittelumenetelmänä 3D-mallinnus on korvannut 2D-menetelmiä voimakkaasti jo yli kahden vuosikymmenen ajan. Myös tämän diplomityön taustalla on teollisuudessa toimivan yrityksen siirtyminen 2D-CAD-järjestelmästä 3D-CAD-järjestelmän käyttöön. Yrityksessä päätettiin samalla tutkia, voidaanko parametrista 3D-CAD-suunnittelua ja sen mahdollistamaa suunnittelun automatisointia hyödyntää yrityksen suunnitteluprosesseissa. Tutkimuksen tavoitteeksi asetettiin sellaisen järjestelmän luonti, jolla yrityksen tuotteen osasta, varastohyllystöstä voidaan tehokkaasti tuottaa projektikohtaisia 3D-malleja. Tässä tuli hyödyntää tuotteen parametrisuutta sekä suunnitteluautomaatiota. Tavoitteena oli kyetä tuottamaan järjestelmällä 3D-malleja, joiden tarkkuustaso riittää yrityksen tarjousten esisuunnittelun tarpeisiin. Ajalliseksi tavoitteeksi 3D-mallin tuottonopeudelle asetettiin yksi työpäivä. Varsinaisen valmistussuunnittelun osalta tavoitteena oli, että tarjoussuunnittelun tarpeita varten tuotetut mallit ovat manuaalisesti täydennettävissä. Diplomityön lopputuloksena syntyi suunnitteluautomaatti, jolla voidaan tuottaa varastohyllystön pääkomponentit sisältävä 3D-malli alle yhdessä työpäivässä. Suunnitteluautomaatti toteutettiin linkittämällä Excel-taulukkolaskentaohjelma ja Creo 3D-CAD-ohjelma keskenään COM-rajapinnan kautta. Vaihtoehtoisiin menetelmiin verrattuna valittua toteutustapaa voidaan pitää järkevänä, saavutetut kustannussäästöt ja erityisesti sen jatkokehitysmahdollisuudet huomioiden. Suunnitteluautomaatin testauksesta saatujen tulosten perusteella sekä tarjous- että valmistussuunnittelun osalta asetetut tavoitteet täyttyivät diplomityössä. |
ED: | 2013-12-09 |
INSSI record number: 48164
+ add basket
« previous | next »
INSSI