search query: @keyword product configurator / total: 7
reference: 1 / 7
« previous | next »
Author:Anttila, Martti Juho
Title:Interactive constraint solving in a configurator
Vuorovaikutteinen rajoitteiden ratkaisu konfiguraattorissa
Publication type:Master's thesis
Publication year:2013
Pages:63      Language:   eng
Department/School:Perustieteiden korkeakoulu
Main subject:Tietojenkäsittelyteoria   (T-79)
Supervisor:Heljanko, Keijo
Instructor:Mäkelä, Markus
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark Aalto     | Archive
Keywords:mass configuration
product configurator
constraint solver
massakonfigurointi
tuotekonfiguraattori
rajoiteratkaisin
Abstract (eng): Mass customization is an act of combining mass production and craft production.
The aim is to create products that fit to a single customer's needs with mass production -like efficiency.

Product configurators are to make mass customization easier in practice.
Configurable products usually consist of components, and the user of the configurator has to select the components for the product.
Usually there are constraints among the components; all components are not compatible with each other.
In early configurators these constraints were handled with rules and the dependencies of components were expressed as "if -then" rules.

The problem with such configurators is that maintaining the rule base in constantly changing product models becomes very difficult.
Nowadays, many product configurators are constraint-based.
Usually fewer constraints are needed to express the same relations as with rules.
However, there are also challenges in using constraints; solving constraints can be very time consuming.
In this work, we apply an open source constraint solver to a rule-based commercial configurator.

The configurator product model is reduced into a Constraint Satisfaction Problem.
Then the problem is solved interactively based on the user selections using the constraint solver.
Example runs of the configurator are shown; results are measured by validation times of product models.
The results were very satisfying, and the system is now in production use.
Abstract (fin): Massaräätälöinti tähtää massatuotannon ja yksilöllisten tuotteiden tuotannon hyvien puolien yhdistämiseen.
Tavoite on tuottaa yksilöityjä tuotteita massatuotannon tehokkuudella.

Tuotekonfiguraattorit tekevät massaräätälöinnistä helpompaa käytännössä.
Konfiguroitavat tuotteet koostuvat yleensä komponenteista, ja konfiguraattorin käyttäjän tehtävä on valita komponenteista haluamansa.
Komponentteihin liittyy lähes aina rajoitteita, koska jotkut komponentit eivät ole yhteensopivia toisten kanssa.
Aiemmin tuotekonfiguraattorit olivat sääntöpohjaisia.

Komponenttien väliset riippuvuudet ilmaistiin "jos - niin" säännöillä.
Yksi pääongelma tässä tavassa on suurten sääntömäärien ylläpito jatkuvasti muuttuvissa tuotemalleissa.
Nykyään jotkin konfiguraattorit ovat rajoitepohjaisia.
Yleensä rajoitteita tarvitaan vähemmän kuin sääntöjä, mutta niihin liittyy muita ongelmia.
Rajoitteiden ratkaisu vaatii paljon laskentatehoa.

Tässä työssä yhdistetään eräs vapaan lähdekoodin rajoiteratkaisin kaupalliseen sääntöpohjaiseen konfiguraattoriin.
Konfiguraattorin tuotemallista rakennetaan ensin rajoiteongelma (CSP, Constraint Satisfaction Problem) ja tämän jälkeen rajoiteongelmaa ratkotaan vuorovaikutteisesti käyttäjän tekemien valintojen mukaan.
Työssä esitetään esimerkkejä konfiguraattorin käytöstä sekä suorituskyvystä.
Tulokset olivat hyviä ja järjestelmä on otettu tuotantokäyttöön
ED:2014-01-07
INSSI record number: 48289
+ add basket
« previous | next »
INSSI