search query: @keyword process design / total: 8
reference: 4 / 8
Author: | Tamminen, Miikka Olli |
Title: | Utilization of simulation based plant availability assessment in process design |
Laitoksen simulointiavusteisen käytettävyysanalyysimallin hyödyntäminen prosessisuunnittelussa | |
Publication type: | Master's thesis |
Publication year: | 2012 |
Pages: | vii + 84 + [7] Language: eng |
Department/School: | Biotekniikan ja kemian tekniikan laitos |
Main subject: | Tehdassuunnittelu (Kem-107) |
Supervisor: | Koskinen, Jukka |
Instructor: | Frejborg, Andreas ; Karlsson, Stefan |
OEVS: | Electronic archive copy is available via Aalto Thesis Database.
Instructions Reading digital theses in the closed network of the Aalto University Harald Herlin Learning CentreIn the closed network of Learning Centre you can read digital and digitized theses not available in the open network. The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/ You can read theses on the Learning Centre customer computers, which are available on all floors.
Logging on to the customer computers
Opening a thesis
Reading the thesis
Printing the thesis
|
Location: | P1 Ark Aalto 2072 | Archive |
Keywords: | availability assessment simulation process design käytettävyysanalyysi simulointi prosessisuunnittelu |
Abstract (eng): | Reliability is an important factor when designing a plant, although traditionally the interest has been on other parts of plant design. Plant unavailability can cause loss of potential profit up to 100 000$ per hour. The aim of this thesis is to introduce the concept of availability assessment and its use in concurrent reliability and process design engineering, and to develop a reliable simulation model that produces consistent availability assessment results. This thesis presents a literature study of availability assessment in four parts. The first part explains the related terms and the second part presents selected conventional methods related to availability assessment. In the third part, reliability databank types and some examples of data sources are introduced. In the final part of the literature study, the concurrent engineering concept is introduced as a solution to the traditional approach, where reliability design is done after the process design and cannot efficiently affect the decisions made during the design phase. In the applied part of this thesis the availability assessment simulation model was built on top of a dynamic discrete event simulator. Five different cases of a crude distillation unit and its upstream are presented and simulated with simulation runs of 300 experiments. The model gives out availability data, throughput of the process, mean time between failure and average failure count. In addition, cost estimation is done between the cases using Hand factor method. The results verified that increasing redundancy in process increases availability, but the costs of increasing redundancy have to be optimized with the gained availability. Thus the developed simulation model is consistent with the theory part of this thesis and works correctly. |
Abstract (fin): | Luotettavuus on tärkeä osatekijä laitosta suunniteltaessa, vaikka perinteisesti laitossuunnittelussa on keskitytty muihin suunnittelun osa-alueisiin. Laitoksen alasajo epäluotettavuuden seurauksena voi maksaa jopa 100 000$ tunnissa. Tämän diplomityön tavoitteena on tutustua käytettävyysarvioinnin käsitteeseen ja sen käyttöön samanaikaisessa prosessi- ja luotettavuussuunnittelussa. Työn tavoitteena on myös kehittää luotettava simulointimalli, joka tuottaa järkeviä ja johdonmukaisia käytettävyysarvioinnin tuloksia. Työn kirjallisuusosassa käsitellään käytettävyysarviota neljässä osassa. Ensimmäiseksi selitetään käytettävyyteen liittyvät termit, kuten luotettavuus ja huollettavuus. Toisessa osassa esitetään valittu joukko tavanomaisia menetelmiä käytettävyyden arvioimiseen. Kolmas osa käsittelee luotettavuustietopankkien tyyppejä ja muutamaa tietolähdettä. Viimeisessä osassa esitetään samanaikaisen suunnittelun käsite ratkaisuna perinteiseen lähestymistapaan, jossa luotettavuussuunnittelu tehdään vasta prosessisuunnittelun jälkeen. Perinteisessä lähestymistavassa ei voida tehokkaasti vaikuttaa suunnitteluratkaisuihin. Diplomityön soveltavassa osioissa käytettävyysarvioinnin simulointimalli rakennettiin dynaamisen tapahtumapohjaisen simulaattorin päälle. Työssä esitellään viisi erilaista tapausta raakaöljyn tislausyksiköstä ja sen esikäsittelystä. Nämä tapaukset simuloitiin rakennetulla mallilla 300 simuloinnin sarjoissa. Malli antaa tulokset käytettävyystietoina, prosessin läpisyöttönä, keskivertohäiriömääränä ja keskimääräisenä aikana häiriöiden välillä. Lisäksi tehtiin kustannusarvio tapausten välillä käyttäen Handin menetelmää. Tulokset vahvistivat sen, että rinnankonfiguraatioiden lisääminen malliin nostaa käytettävyyttä, mutta lisäys pitää tasapainottaa lisättävien laitteiden kustannusten kanssa. Täten voidaan todeta, että malli on johdonmukainen teoriaosuuden kanssa ja toimii oikein. |
ED: | 2013-01-09 |
INSSI record number: 45783
+ add basket
INSSI