search query: @supervisor Arkkio, Antero / total: 80
reference: 17 / 80
« previous | next »
Author:Singh, Deepak
Title:Calorimetric Measurement of the Stator Core Losses Caused by Manufacturing
Publication type:Master's thesis
Publication year:2011
Pages:viii + 45 s. + liitt. 7      Language:   eng
Department/School:Sähkötekniikan laitos
Main subject:Sähkömekaniikka   (S-17)
Supervisor:Arkkio, Antero
Instructor:
Electronic version URL: http://urn.fi/URN:NBN:fi:aalto-201207022755
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark Aalto  1434   | Archive
Keywords:electrical machine
core loss
manufacturing effects
calorimeter
Abstract (eng): This thesis is a part of the research on the effect of the manufacturing process on the core losses of the electrical machine.
Within this thesis, a special test setup, that has same flux density distribution as the actual machine in no-load, is used to measure only the stator core loss.
For this, a slip-ring rotor is designed and constructed.
Furthermore, a modified calorimeter is constructed to accurately measure the stator core loss.
In order to account only for the stator core loss, the test setup is excited from the stationary rotor which is also thermally isolated from the measurement chamber of the modified calorimeter.

The experimental setup is then operated at various conditions to determine the range of operation having optimal accuracy.
After that, the stator core losses at frequencies ranging from 300 Hz to 1 kHz and air-gap flux densities ranging from 0.3T to 0.4 T, are measured and compared with the results obtained from the FE simulation (FCSMEK).
The measured result at almost all the frequencies and the air-gap flux densities is found to be approximately twice of that obtained from the FE simulation.
Furthermore, the accuracy of measurement is acceptable for this comparison, but for future study, i.e. comparing the difference after the heat treatment, the level of inaccuracy is too high.
Thus, few modifications are recommended.
ED:2012-02-01
INSSI record number: 43903
+ add basket
« previous | next »
INSSI