search query: @supervisor Aalto, Jukka / total: 84
reference: 13 / 84
« previous | next »
Author:Kaira, Tuomas
Title:Siltojen geoteknisen suunnittelun kansalliset valinnat Eurokoodiin
National determined parameters of geotechnical design of bridges for the Eurokode
Publication type:Master's thesis
Publication year:2010
Pages:      Language:   fin
Department/School:Insinööritieteiden ja arkkitehtuurin tiedekunta
Main subject:Rakenteiden mekaniikka   (Rak-54)
Supervisor:Aalto, Jukka
Instructor:Hyvönen, Juhani
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark Aalto     | Archive
Abstract (eng): The subject of this master's thesis is National Determined Parameters of geotechnical design of bridges for the Eurocode.
The aim of this study is to determine those parameters in Finland for the National Annex of geotechnical design of bridges.

The Eurocodes replace the present design standards for the design of load-bearing structures.
The Eurocodes will he introduced for bridge design in Finland on 1.6.2010.

The research material consists of existing bridge foundations.
Included are both abutments and intermediate supports of road and railway bridges.
Studied types of foundations are natural foundation bed, rock foundation and pile foundation.
The study includes a total of 21 foundations.
The purpose of this study is to maintain the level of security of bridge foundations after introduction of the Eurocodes.

The Eurocode standard Geotechnical design provides three alternative design approaches, from which design approach 2 has been selected for the design of bridge foundations in Finland.
In design approach 2 there are two alterative ways to proceed.
This study aims to determine the way of proceeding when the design approach 2 is used, partial factors for loads and resistances as well as correlation factors for piles.

Comparison calculations in the study were carried out by designing the foundation using present design standards at first and then by using design approach 2 of Eurocode and both of its ways to proceed.
Also alternative values for partial factors and correlation factors were used.

Based on the results of the study, design approach DA2* is proposed to be used for designing the foundations of bridges.
The values from National Annex NA SFS-EN1997-1 (YM) are proposed to partial factors for resistances and correlation factors.
Abstract (fin): Tämä diplomityö käsittelee siltojen geoteknisen suunnittelun kansallisten valintojen tekemistä Eurokoodi-järjestelmää varten.
Työn tavoitteena on määrittää suomen kansalliset valinnat siltojen geoteknisen suunnittelun kansallista liitettä varten.

Eurokoodi-järjestelmä korvaa kantavia rakenteita koskevat nykyiset kansalliset suunnitteluohjeet.
Suomessa tullaan siirtymään sillansuunnittelussa järjestelmän käyttöön 1.6.2010.

Tutkimusaineisto koostuu olemassa olevien siltojen perustuksista.
Mukana on sekä tie- että ratasiltojen väli- ja maatukia.
Tutkittuja perustamistapoja on maanvarainen, kallionvarainen sekä paaluperustus.
Tutkimuksessa on mukana yhteensä 21 perustusta.
Tutkimuksen tarkoituksena on säilyttää siltojen perustusten varmuustaso nykyisellään siirryttäessä käyttämään Eurokoodi-järjestelmää.

Eurokoodin standardissa Geotekninen suunnittelu annetaan kolme vaihtoehtoista mitoitustapaa, joista Suomessa on valittu käytettäväksi mitoitustapa 2 siltojen perustuksia mitoitettaessa.
Mitoitustapaa 2 käytettäessä voidaan menetellä kahdella vaihtoehtoisella tavalla.
Tässä työssä pyritään suoritetuilla vertailulaskelmilla selvittämään mitoitustavalla 2 laskettaessa käytettävä menettelytapa, käytettävät osavarmuusluvut kuormille ja kestävyyksille sekä paalujen mitoituksessa käytettävät korrelaatiokertoimet.

Vertailulaskenta suoritettiin mitoittamalla ensin perustukset voimassa olevien ohjeiden mukaisesti.
Tämän jälkeen suoritettiin mitoitus Eurokoodin mukaan molemmilla mitoitusmenetelmillä ja käytettiin vaihtoehtoisia arvoja osavarmuusluvuille ja korrelaatiokertoimille.

Tutkimusten tulosten pohjalta ehdotetaan käytettäväksi mitoitustapaa DA2* siltojen perustuksia mitoitettaessa.
Kestävyyksien osavarmuusluvuiksi ja paalujen korrelaatiokertoimiksi ehdotetaan käytettävän kansallisen liitteen NA SFS-EN1997-1 (YM) mukaisia arvoja.
ED:2010-09-24
INSSI record number: 40959
+ add basket
« previous | next »
INSSI