search query: @keyword 3D / total: 86
reference: 34 / 86
Author: | Liira, Riku |
Title: | Designing a configuration model for an electric generator product family |
Konfigurointimallin suunnittelu sähkögeneraattori tuoteperheelle | |
Publication type: | Master's thesis |
Publication year: | 2010 |
Pages: | 83 [+16] Language: eng |
Department/School: | Koneenrakennustekniikan laitos |
Main subject: | Koneensuunnitteluoppi (Kon-41) |
Supervisor: | Coatanéa, Eric |
Instructor: | Kamppuri, Janne |
OEVS: | Electronic archive copy is available via Aalto Thesis Database.
Instructions Reading digital theses in the closed network of the Aalto University Harald Herlin Learning CentreIn the closed network of Learning Centre you can read digital and digitized theses not available in the open network. The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/ You can read theses on the Learning Centre customer computers, which are available on all floors.
Logging on to the customer computers
Opening a thesis
Reading the thesis
Printing the thesis
|
Location: | P1 Ark TKK 6497 | Archive |
Keywords: | 3D CAD NX PDM Teamcenter configuration model product model parameterization configuration customization 3D CAD NX PDM Teamcenter konfigurointimalli tuotemalli parametrisointi konfigurointi räätälöinti |
Abstract (eng): | This thesis studies how the design work of customizable products can he rationalized by creating and using configuration models. Customizable products aim to combine the benefits of mass produced- and tailor-made products. The differentiation possibilities are limited to certain modules while the rest of the product is standardized. This gives the customer the opportunity to customize the product while still keeping manufacturing costs low. A configuration model contains all the information on the possibilities of adapting a specific product to varying customer needs. Instead of designing each product variant individually, new product variations are configured according to specific customer requirements by using the configuration model. The goal of this thesis was to design a simplified configuration model of the low voltage synchronous marine generator product family. The primary purpose of use for the configuration model is to create main dimension drawings of the different generator variants. These drawings are needed so that they can be sent to potential customers along with sales quotations. The configuration models were designed with the product data management software Teamcenter and the design software NX. The theory part of the thesis discusses customizable products and product models in general. The working principle of electric generators and the specific characteristics of the low voltage synchronous generator product family are also examined. The practical part included making the 3D-models of the various generator components. The configuration options and rules that make up the functional logic of the configuration models also needed to be designed. In the end 4 configuration models were created. The configuration models proved to be a functional and efficient tool for producing main dimension drawings. In fact, several main dimension drawings that were generated with the configuration models were sent to potential customers while this thesis was being written. |
Abstract (fin): | Tämä diplomityö käsittelee kuinka asiakasvarioituvien tuotteiden suunnittelua voidaan tehostaa suunnittelemalla ja käyttämällä konfigurointimalleja. Asiakasvarioituvat tuotteet pyrkivät yhdistämään massatuotettujen ja asiakaskohtaisesti räätälöitävien tuotteiden etuja. Variointimahdollisuudet ovat rajattu tiettyihin moduuleihin kun muut tuotteen osat ovat standardoituja. Tämä antaa asiakkaalle mahdollisuuden yksilöllistää tuote omien tarpeidensa mukaiseksi vaikka valmistuskustannukset säilyvätkin alhaisina. Konfigurointimalli sisältää tiedon kaikista tuotteen variointimahdollisuuksista. Sen sijaan että jokainen tuotevariaatio suunniteltaisiin erikseen, konfigurointimallia käyttämällä voidaan konfiguroida uusia asiakaskohtaisia tuotevariaatioita. Tämän työn tavoitteena oli suunnitella yksinkertaistettu konfigurointimalli pienjännite tahtigeneraattori tuoteperheelle. Konfigurointimallin pääkäyttötarkoitus on tuottaa päämittakuvia, jotka voidaan lähettää potentiaalisille asiakkaille myyntitarjousten mukana. Konfigurointimallin rakentamiseen käytettiin Teamcenter- tuotetiedonhallintaohjelmaa ja NX- suunnitteluohjelmistoa. Työn teoriaosa käsittelee asiakasvarioituvia tuotteita ja tuoteperheitä yleensä. Sähkögeneraattorin toimintaperiaate ja pienjännite tahtigeneraattori tuoteperheen ominaispiirteet käydään myös lyhyesti läpi. Käytännön osuus koostui pääosin generaattorin osien yksinkertaistettujen 3D-mallien tekemisestä, sekä konfigurointimallin konfiguraatiosääntöjen ja toiminnallisuuden suunnittelusta. Työssä päädyttiin lopulta suunnittelemaan neljä erillistä konfigurointimallia. Nämä mallit osoittautuivat toimiviksi ja tehokkaiksi työkaluiksi päämittakuvien luomisessa. Diplomityön kirjoittamisen aikana useita konfigurointimalleilla tehtyjä päämittakuvia lähetettiin myyntitarjousten mukana potentiaalisille asiakkaille. |
ED: | 2010-05-17 |
INSSI record number: 39630
+ add basket
INSSI