search query: @supervisor Gane, Patrick / total: 9
reference: 2 / 9
« previous | next »
Author:Jutila, Eveliina
Title:Further development of laboratory simulation of tail-edge pick
Kuva-alueen takareunan pikkautumisen laboratoriosimuloinnin jatkokehitys
Publication type:Master's thesis
Publication year:2012
Pages:153 + [42]      Language:   eng
Department/School:Puunjalostustekniikan laitos
Main subject:Paperi- ja painatustekniikka   (Puu-21)
Supervisor:Gane, Patrick
Instructor:Ridgway, Cathy
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark Aalto  2279   | Archive
Keywords:lithography
edge pick
liquid-coating interactions
tack
coating strength
litografia
kuva-alueen reunan pikkautuminen
neste-päällyste vuorovaikutukset
painomusteen tahmeus
päällysteen lujuus
Abstract (eng): The aim of this study was to improve a previously partially developed laboratory method of tail-edge pick simulation by increasing the sensitivity to the number of passes required to induce tail-edge pick and by adapting new flexographic polyester backing.

The literature review introduces the offset printing method, and the edge pick phenomenon, its causes and solutions and describes how liquid-coating structure interactions, ink tack, coating strength and the stiffness and compressibility of multi-layered coated paper contribute to tail-edge pick.

The number of successful passes without tail-edge pick was increased by investigating the effect of the following parameters on tail-edge pick: fountain solution type and amount, delay between wetting and printing, ink type and ink loading level, force and speed of printing, force and speed of passes and the delay between passes, and by developing an improved test setup based on these investigations.
The ink loading level and force and speed of printing were found to be the most influential parameters.
The number of successful passes was increased by increasing the ink loading level, reducing the speed and force of printing.

The improved test method was used to test 11 commercially ranked papers.
The number of successful passes was increased from a maximum of two to a maximum of eight, and the degree of tail-edge pick was decreased significantly when the results of the initial and improved test method were compared.
A good correlation, having R2 = 0.92, was established between the improved tail-edge pick values and the commercial ranking when Paper 11 was excluded.
This shows that this laboratory scale test method correlates well with the real printing trials, and can thus be used to simulate tail-edge pick effectively.
Abstract (fin): Tämän työn tarkoituksena oli parantaa aiemmin kehitettyä kuva-alueen takareunan pikkautumisen (tail-edge picking) laboratoriosimulaatio menetelmää lisäämällä menetelmän herkkyyttä kuva-alueen takareunan pikkautumisen aiheuttamiseen tarvittavien toistojen lukumäärää koskien sekä ottamalla käyttöön uusi fleksograafinen polyesteritausta.

Kirjallisuuskatsauksessa esitellään sekä offset painomenetelmä että kuva-alueen reunojen pikkautuminen, sen syyt sekä ratkaisuja ja kuvaillaan kuinka neste-päällyste vuorovaikutukset, painomusteen tahmeus, päällysteen lujuus, jäykkyys sekä kokoonpuristuvuus vaikuttavat painetun kuva-alueen takareunan pikkaantumiseen.

Onnistuneiden toistojen lukumäärä ilman kuva-alueen takareunan pikkautumista korotettiin tutkimalla seuraavien parametrien vaikutusta pikkautumiseen: kostutusvesi ja sen määrä, kostutuksen ja painatuksen välinen viive, painomustetyyppi ja määrä, painamiseen käytetty puristusvoima ja nopeus, toistoihin käytetty puristusvoima ja nopeus sekä toistojen välinen viive, sekä kehittämällä paranneltu testiasetelma tutkimusten perusteella.
Painomusteen määrällä sekä painamiseen käytetyllä puristusvoimalla ja nopeudella oli suurin vaikutus onnistuneiden toistojen lukumäärään.
Toistojen lukumäärää korotettiin lisäämällä painomusteen määrää ja vähentämällä sekä painamiseen käytettyä puristusvoimaa että nopeutta.

Parannettua testimetodia käytettiin 11 kaupallisesti luokitetun paperin testaamiseen.
Onnistuneiden toistojen maksimi lukumäärää nousi kahdesta kahdeksaan, ja kuva-alueen takareunan pikkautuminen väheni selvästi kun uusia tuloksia verrattiin alkuperäisiin tuloksiin.
Hyvä korrelaatio (R2 = 0.92) saatiin aikaiseksi tuloksien ja kaupallisen luokittelun välille, kun Paperi 11 jätettiin huomioimatta.
Tämä osoittaa, että tämä laboratorio testimenetelmä korreloi hyvin todellisten painotutkimuksien kanssa, joten tätä metodia voidaan käyttää kuva-alueen reunan pikkautumisen simulointiin.
ED:2013-02-26
INSSI record number: 45865
+ add basket
« previous | next »
INSSI